Catalogs >
Arthur Grillo GmbH >
data sheet DS200

data sheet DS200
1 / 2Pages

Catalog excerpts

Arthur Grillo DIFFERENTIAL PRESSURE SENSOR with selectable measurment range DS200 MENSIO measuring system Sensor for differential pressure or volume flow Measuring range from 0...50 Pa (0.5 mbar) up to 0...6000 Pa (60 mbar) Software menu for parameterization - Switchable measuring variables (differential pressure or volume flow) - Selectable units (metric or imperial) - k-factor (input range k-factor up to 10,000) Setting for volumetric flow - 4 calibrated measuring ranges selectable via DIP-switch - Characteristic adjustment: Linear / radiated - Analogue output signal 0/2...10 V or 0/4...20 mA - Measuring mode with adjustable limit value - Alarm delay time (switching delay) 1 sec. to 15 minutes adjustable - Switching and contact logic for 4 different states □ Open collector alarm output (max. 30 V / 30 mA) □ Damping of the output signal adjustable via DIP switch □ Supply voltage 17...30 Vdc; 24 Vac (+/-15%) □ Compact plastic housing IP 54 The DS200 differential pressure sensor is used to measure small differential pressures in ventilation and air conditioning systems. In combination with an effective pressure transducer (for example, a venturi nozzle, a venturi tube, a measuring diaphragm), suitable for the calculation of the volumetric flow. Known fields of application are: Ventilation systems, room pressure monitoring, filter monitoring process, environmental, clean room technology, fan technology, pump technology, suction technology, pressure switch. All our differential pressure transducers of the DS series have our optimized mechanical measuring system MENSIO. The MENSIO has been steadily developed over many years and has always proved itself against all adversities. It is particularly characterized by its precision, longevity and insensitivity to external influences. Error limits (related to the actual range) Unit type Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: info@grillo-messgeraete.de • web shop: www.sensor-store.

Open the catalog to page 1

DIFFERENTIAL PRESSURE SENSOR with selectable measurment range DS200 Overpressure protection: Static pressure: Zero point calibration: Response time: Zero drift: Sum of linearity and hysteresis: Temperature drift measuring range: Operating mode: Measuring medium: Measuring principle: Measuring unit: Smallest measuring range: Largest measuring range: Measuring range: Measuring range selection: Characteristic: Damping: Ambient temperature: Storage temperature: Setpoint settings: Limit signal Output / alarm output: Alarm delay time: Switching logic: Contact logic: Housing:...

Open the catalog to page 2