data sheet DPC200-MOD - 2 Pages

Add to MyDirectIndustry favorites
data sheet DPC200-MOD

Catalog excerpts

DIFFERENTIAL PRESSURE & VOLUME FLOW CONTROLLER - DPC200-MOD Electromechanical diaphragm measuring system Configuration via Modbus communication Selectable measurements (differential pressure or volume flow) Selectable units (Pa / InH20 or m3/h or cfm) Selectable control mode or measuring mode Control mode with adjustable: setpoint, maximum output voltage, P and I parameterd for PI-algorithm, direct or inverse sense Adjustable k-factor for volume flow calculation Analog output 0...10 V Alphanumeric LCD-display Supply voltage 22...26 Vdc; 24 Vac (+/-10%) Compact plastic housing IP 54 Elektrischer Anschluss The DPC200-MOD has been developed to bundle functions needed in the HVAC industry into one device. As a precise differential pressure sensor it can transmit measurements for both pressure and air flow. The integrated 1 DPC200-MOD + 15...30 Vdc oder 24 systems, where PI control logic is an important component in decentralized closed loop controlVac (±15%) Versorgungpressure and air flow 2 have to be constantly controlled. - GND 3 The additional Modbus RTU interface is intended for the digitalisation of industrial processes. All device parameters + 0...10 Vdc Ausgang ΔP can be read and written with the Modbus RTU interface. 4 - GND For direct analog processing, a 0 ... 10 V signal output is available. This signal can be configured as a linear / square 5 B root measuring signal, or as a manipulated variable of the closed loop controller. MODBUS 6 It can be used, for example, in air-conditioning technology for controlling fans, monitoring room pressure or controlling filters. Connection diagram 1

 Open the catalog to page 1

DIFFERENTIAL PRESSURE & VOLUME FLOW CONTROLLER - DPC200-MOD Overpressure protection: Static pressure: Zero point calibration: Reaction time: PERFORMANCE: 0.2 bar max. 0.2 bar Adjustable by REEDcontact, no cyclic zero-point calibration required direct Zero drift: Sum of linearity and hysteresis: Temperature drift zero point: Temperature drift measuring range: Operating mode: Measuring medium: Measuring principle: Measuring unit: Smallest measuring range: Largest measuring range: Measuring range: Measuring range selection: Adjustable controlling parameters: Characteristic: Ambient...

 Open the catalog to page 2

All Arthur Grillo GmbH catalogs and technical brochures

  1. data sheet mkm

    1 Pages

  2. data sheet AF1

    1 Pages

  3. data sheet O2T

    1 Pages

  4. data sheet ETF

    1 Pages

  5. data sheet edr

    1 Pages

  6. data sheet wbv

    1 Pages

  7. data sheet mbz

    1 Pages

  8. data sheet CM2

    1 Pages

  9. data sheet MID

    1 Pages

  10. SPECIAL

    18 Pages

  11. TEMPERATURE

    20 Pages

  12. Display

    14 Pages

  13. HUMIDITY

    21 Pages

  14. PRESSURE

    35 Pages

  15. WR 200-F

    2 Pages

  16. data sheet DS85

    2 Pages

  17. data sheet DA85

    1 Pages

  18. SHT11/15

    1 Pages

  19. Orifice plate

    3 Pages

  20. SGI

    1 Pages

  21. Venturirohr

    4 Pages

  22. MR 90

    4 Pages

Archived catalogs

  1. MID

    1 Pages

  2. MINI90

    1 Pages

  3. RGF

    1 Pages

  4. WBV

    1 Pages

  5. DS85-P

    2 Pages

  6. DS85

    1 Pages

  7. DPCS200

    2 Pages

  8. WR 90

    1 Pages

  9. AQD / AQ72

    1 Pages

  10. TOUCHSCREEN

    1 Pages

  11. AD-72P

    1 Pages

  12. AD96TF

    1 Pages

  13. AD 72P-ST

    1 Pages

  14. AD 72P-WT

    1 Pages

  15. AD 96TF

    1 Pages

  16. AFD

    1 Pages

  17. AFD-TK

    1 Pages

  18. CM2

    1 Pages

  19. O2T

    1 Pages

  20. ST225

    1 Pages

  21. SP225

    1 Pages

  22. TR225

    1 Pages

  23. GS225

    1 Pages

  24. GIV

    1 Pages

  25. Flora II

    1 Pages

  26. AF 1

    1 Pages

  27. catalogue

    80 Pages