Arthur Grillo DIFFERENTIAL PRESSURE MANOMETER DA2000-S / DA2000-K-S / DA2000-A-S □ Diaphragm element □ Smallest measuring range 0...100 Pa □ Wide 270° analogue display - scale length ca. 250 mm □ No supply voltage needed □ Scaling in m3/h possible □ Protection class IP 66 □ Analogue output 0...10 V or 4...20 mA possible □ Combination with pressure switch available (1.5 A / 250 Vac) Manometer with diaphragm element for indication of pressure, under pressure or differential pressure of non aggressive gas. The Manometer is delivered with accessories for mounting in front or behind a panel or wall installation. Optional are: • Two limit value pointers red or green • Manometer with analogue output signal • Combination of indicator and pressure switch fitted in a wall mounting bracket Overload protection: Static pressure: Zero point calibration: Reaction time: Zero drift: Sum of linearity and hysteresis: Temperature drift zero point: Temperature drift measuring range: Operating mode: Measuring medium: Measuring principle: Measuring unit: Smallest measuring range: Largest measuring range: Measuring range: Measuring range selection: Ambient temperature: Storage temperature: Housing: Dimensions: Weight: Protection class: Display: Scaling: Pressure connections: PERFORMANCE: min. up to 10-times the measuring range max. 0.2 bar scale fine adjustment via screw direct ACCURACY/ERROR LIMIT: ± 0.75 % ± 2 % of measuring range ± 0.3 % / 10 K ± 0.2 % / 10 K TECHNICAL SPECIFICATIONS: Measuring mode Air or non-aggressive gases diaphragm measuring system Pa 0...200 Pa (2 mbar) 0...5000 Pa (50 mbar) 0.100 Pa (1 mbar), 0...200 Pa (2 mbar), 0.500 Pa (5 mbar), 0...1000 Pa (10 mbar), 0...2000 Pa (20 mbar), 0.5000 Pa (50 mbar) factory preset -10...+50 °C -25...+60 °C PHYSICALLY: Ultramid/ABS, transparent cover 164 x 194 x 110 mm (w x h x d) approx. 1460 g IP66 according EN 60529 pointer display with scale Scale length 270° = ca. 250 mm Hose connections 5 mm 0 Date: 13.02.17 PRESSURE CONFORMITY: EMC: EN 61000-6-2, EN 61000-6-3, CE-mark RoHS: according RoHS-directive 2011/65/EU Nullpunkt-Kalibration: Characteristics: Electrical connections: Power supply: Output: Switching function: Adjustable switching ranges: Tolerance on upper and lower switching point: Switching capacity: Setpoint setting: Limit signal / alarm output: Special features DA2000-A Adjustable by REEDcontact, no cyclic zero-point calibration required,scale fine adjustment via screw linear or sqaure root rectangular connector 16 mm or color coded cable, approx. 50 cm long two-wire circuit: 12...30 Vdc / three-wire circuit: 15...30 Vdc or 24 Vac two-wire circuit: 4...20 mA / three-wire circuit: 0...10 V Special features DA2000-K yes 20...300Pa, 30...400Pa, 50...500Pa, 200...1000Pa, 500...2500Pa, 1000...5000Pa ± 15 % max. 1.5 A / 250 Vac Poti with scale via pressure switch Arthur Grillo GmbH • Am Sandbach 7 • 40878 Ratingen • phone 0 21 02 - 47 10 22 • fax 0 21 02 - 47 58 82 www.grillo-messgeraete.de/en • Email: [email protected] • web shop: www.sensor-store.de

Cabel, 3-wire, approx. 50 cm length Wall mounting Wandbefestigung Wall mounting Item no. Differential pressure manometer DA2000-S Differential pressure manometer DA2000-K-S Measurement range: Customer-specific presetting required! Differential pressure manometer DA2000-A-S Measurement range: Customer-specific presetting required! ACCESSORIES Mounting set M-DA2000 with screws, plastic-pressure taps, 2 m plastic hose (5 x 1.5 mm) 1. Limit value pointer red or green - Please choose! 2. Limit value pointer red or green - Please choose! Measurement range: Customer-specific presetting required! Output...