4-digit digital indicator with 20mm high LED-display DIN case 96 x 48 mm Input signal 0... 1 V, 0... 10 V or 0/4...20 mA Supply voltage for 2 wire transmitter (approx. 18 Vdc) available Cyclic switching between two input signals Power supply 24 Vac, 24 Vdc or 230 Vac 4-digit digital display with 20 mm high LED display in the DIN Case 96 x 48 mm. As the input signal voltages can 0...1 V, 0...10 V or 0/4...20 mA currents are processed. It gives the display a DC voltage for powering two two-wire transmitters The display will cycle between the two input signals are switched. The evaluation of the two signals is digital. A temperatur-/humiditytransmitter can be connected. Then the display shows the cyclical change of temperature and relative humidity. Specifications Display: Panel dimension 4-digit red LED-display, display extensive: -999...9999, height of digits: 20 mm Range: 0...1 V, 0...10 V, 0/4...20 mA feeding a two-wire-transmitter supply voltage approx. 18 Vdc Evaluation of the display: internal digital evaluation of zero and span Solution of the display: Supply voltage: max. 10 bit 230 Vac with transformator or 24 Vac or 24 Vdc Ambient-temperature: 0...50 °C no condensation Case: fiberglass-reinforced noryl 96 x 48 mm, mounting depth 83 mm to DIN 43700 Weight: approx. 0,5 kg Measurement accuracy: 0,2 % v.E. ± 1 digit Connection: screw terminals Accessories: 2 recessed cleats EMC: tested according EN 61000-6-2, EN 61000-6-3, CE mark Built-in supply voltage for two-wire-transmitter Input: 0...10 V, 0..1 V or 0/4...20 mA (Required info in the case of an order!) Supply voltage 230 Vac or 24 Vac or 24 Vdc Input: Indication range 1: Customer-specific presetting required! Indication range 2: Customer-specific presetting required!