motion control technologies SU310 is the high I/O feature PLC from Arteco srl. It provides 40 digital inputs and 40 digital outputs, one analog input, one analog output and one PWM output. Status leds are provided for each digital input and output channel. The default RS232/RS485 serial port supports Modbus RTU for connection to HMI and Scada for advanced process controlling and monitoring purposes. CANopen connectivity allows connection to Arteco CANOpen expansion boards to increase I/O and controlled axes number. Optional Profibus interface allows a direct connection from field I/O signals to the PLC variables. A parallel dedicated expansion bus is also provided to connect SU310-PLC to another 64 I/O expansion . An optional modbus gateway can be connected to the serial interface allowing remote SU310-PLC is made up of two boards, the lower one is the cpu board and the upper one is the connector board. Should customers require his/her own board connector layout and/or connector style the upper board can be rapidly redesigned for a quick and cheap board customization . SU310 pic supports all of the five IEC 61131-3 standard programming languages, thus allowing quick application development.

FEATURES Supply DETAILS NOTES Voltage Power consumption Backup battery 24 Vdc ± 20% from SELV source 1,0 A Inorganic Lithium – CR2032 3V External 24 Vcc, internal 5 Vcc, 12 Vcc, -12 Vcc Backuo battery Resettabile fuse protected, its value is software readable The value does not inlude digital output current Easily available and user- replaceable Supply voltage monitoring Green leds on for correct voltage signalling Red led for backup battery fault, software readable CPU Microprocessor Available memory RISC 20MHz, 16 bit RAM 600 Kbytes With backup battery, protected at power -down Status monitoring...