SU-PLC Programming Language IEC61131-3 SU-PLC is the new low cost PLC based on the long time experience of Arteco Motion Tech in Axis Controllers development. The same ISaGRAF tool used for Axis Controller programs can be used to develop PLC programs. The advantage for Arteco customers is that they can use ONLY one programming tool for all Arteco PLCs and Axis Controllers making it possible to save money and time. In fact all programs are portable to all Arteco PLCs or Arteco Axis Controllers. The standard configuration is 16 digital input, 16 digital output expandables by Canbus and SPI port. Made in ITALY

CHARACTERISTICS DESCRIPTION NOTES Power supply requirements Power supply voltage 24 Vdc ± 20% - 0,5 A Buffer battery Inorganic Lithium – AA-3,6Volts Protected by electronic fuse CPU Microprocessor Infineon , 20 MHz, 16 bit Working memory Backup battery, write protected against power down and reset Retentive Boolean, Integer and text variables Monitoring functions Watch Dog PLC active LED: slow blinking when PLC is active, fast blinking on power supply error (in this case the PLC-ON is turned off) LED on when PLC is active INTERFACES Asynchronous basic serial 1 RS232/RS485 serial port Both available,...