CANOpen Axis Modules Each module controls two axis, controlling independently the motion, closing the control loop locally. This reduces the processing load on the central control unit, which can therefore control a large number of devices. You can build a network of remote axis control devices connected via CanBus, with limited cabling and peripheral localization of positioning functions. The axis control modules' compatibility with the CANOpen fieldbus enables them to be connected to modules and systems compliant with the same standard, easily found on

CHARACTERISTICS DESCRIPTION NOTES FIELDBUS CanBus CANOpen 2.0b POWER SUPPLY REQUIREMENTS CANOpen standard in Slave configuration Power supply voltage AXIS CONTROL 24 Vdc ±20% Number of axes 2 Encoder counting 200 KHz, 32 bit Encoder interface Push Pull, Line Driver, 5Vdc, 12Vdc Jumper-selectable Axis monitoring Watchdog End-of-stroke Axes disabled in the event of alarm Hardware & Software Motion control PID or Feed-Forward Automatic offset calibration Available via software Available via software Multi-axis performance Positioning Linear interpolation Electric axis S-ramp GENERAL FEATURES Field...