catalogo ST

Product catalog summary

Technical Characteristics:
The stopper cylinders operate at a working pressure of 2 to 10 bar for single acting versions. The working temperature ranges from 0 to +80°C, extendable to -20°C with dry air and up to +150°C with high-temperature seals. Available versions include single acting with posterior spring, and bores of Ø 20, 32, 50, and 80 with strokes of 15, 20, and 30 mm. The fluid used is compressed, filtered, and non-lubricated air.

Constructive Characteristics:
Key components include a chrome stainless steel piston rod, steel+PTFE bush, anodized aluminium covers, polyurethane and NBR seals, aluminium piston, rubber magnet, anodized aluminium tube, steel spring, zinc-coated steel screws, and elastic cushioning.

Design Variants:
The cylinders are available with smooth rods or rods with rollers. The applicable load and impact velocity are detailed in diagrams, indicating the maximum and minimum load capacities for different bore sizes.

Key Code and Series Information:
The key code provides specifications for bore, stroke, rod type, seals, series, and version. The series ST includes options for ISO and UNITOP profile tubes with sensor slots, and magnetic single acting stoppers with extended rods.

Load and Force Specifications:
Maximum and minimum load capacities are specified for each bore size, along with the theoretical spring force. Diagrams of operation are provided for clarity.

Company Information:
ARTEC SRL, based in Cento, Italy, has been designing and producing these products since 1982. Contact information and a product catalogue are available for further details.

Catalog excerpts

CI LI NDRI ST OPPER STOPPER CYLINDERS

Open the catalog to page 1

CARATTERISTICHE TECNICHE - TECHNICAL CHARACTERISTICS Pressione di esercizio Working pressure 2 ÷ 10 bar (semplice effetto - single acting) Temperatura di esercizio Working temperature 0 ÷ +80 °C (-20 °C con aria secca - with dry air) 0 ÷ +150 °C (con guarnizioni per alte temperature - with high temperature seals) Versioni - Versions semplice effetto molla posteriore - single acting posterior spring Alesaggi - Bores Corse - Strokes Fluido - Fluid aria compressa, filtrata, non lubrificata - compressed air, filtered, no lubrification CARATTERISTICHE COSTRUTTIVE - CONSTRUCTIVE CHARACTERISTICS 2 Boccola...

Open the catalog to page 2

CHIAVE DI CODIFICA KEY CODE VERSIONE - VERSION liscio smooth con rullino with roller GUARNIZIONI - SEALS STOPPER semplice effetto magnetico stelo esteso ST rod extended magnetic single acting STOPPER SERIE - SERIES guarnizioni standard standard seals guarnizione stelo per alte temperature high temperature rod seal tutte le guarnizioni per alte temperature VA all seals for high temperature tubo profilato ISO con cave per sensori P ISO poofile tube with slot for sensor A tubo profilato UNITOP con cave per sensori UNITOP profile tube with slot for sensor schema di funzionamentO diagram of operation...

Open the catalog to page 3

STELO LISCIO SMOOTH ROD

Open the catalog to page 4

STELO LISCIO

Open the catalog to page 5

STELO CON RULLINO ROD WITH ROLLER PST020.015.GS.R 4,5

Open the catalog to page 6

STELO CON RULLINO ROD WITH ROLLER

Open the catalog to page 7

STELO LISCIO SMOOTH ROD AST032.020.GS.L 5,5

Open the catalog to page 8

STELO CON RULLINO ROD WITH ROLLER 5,5

Open the catalog to page 9

ARTEC SRL Via Pisacane, 15 - 44042 CENTO (FE) - ITALY T + 3 9 0 5 1 6 8 3 6 2 2 0 - F + 3 9 0 5 1 6 8 3 0 8 82 inf o @ar t e c - pn e u m a t i c . c o m - w w w. a r t e c - p n eumatic .c om progetto e produzione made in italy since 1982

Open the catalog to page 10