Catalogo M

Product catalog summary

Technical Characteristics
The pneumatic grippers of series M operate at a maximum working pressure of 10 bar and a temperature range of 0 to +80°C, or -20°C with dry air. They are available in single and double acting versions with bores of Ø 16, 20, 32, and 50. The fluid used is compressed, filtered, and non-lubricated air.

Constructive Characteristics
The grippers are constructed with tempered steel jaws, AISI 303 stainless steel piston rods, and anodized aluminum housing. Other components include tempered steel pins, NBR seals, aluminum pistons, rubber magnets, brass covers, and steel circlips and springs.

Versions and Key Code
The series M grippers are available in various configurations: normally open (NA), normally closed (NC), double acting (DE), and magnetic versions (NAM, NCM, DEM). Each version has specific locking forces and working pressure ranges.

Theoretical Locking Force
The locking force is calculated at a distance of 15 mm from the jaws' fulcrum, except for the M50 model, which is calculated at 30 mm. The locking forces vary depending on the model and configuration, ranging from 4 kg to 60 kg at a pressure of 6 bar.

Dimensional Specifications
Detailed dimensional specifications are provided for each model, including stroke lengths, bore sizes, and other critical measurements necessary for installation and operation.

Company Information
The grippers are designed and manufactured by ARTEC SRL, based in Cento, Italy, since 1982. Contact information and additional product series are listed in the catalog.

Catalog excerpts

PI NZE PNEUMAT IC HE PNEUMATIC GRIPPERS

Open the catalog to page 1

CARATTERISTICHE TECNICHE - TECHNICAL CHARACTERISTICS Pressione di esercizio Working pressure Temperatura di esercizio Working temperature 0 ÷ +80°C (-20°C con aria secca - with dry air) Versioni - Versions semplice effetto, doppio effetto Alesaggi - Bores Fluido - Fluid aria compressa, filtrata, non lubrificata - compressed air, filtered, no lubrification single acting, double acting CARATTERISTICHE COSTRUTTIVE - CONSTRUCTIVE CHARACTERISTICS 1 acciaio temprato - temperd steel alluminio anodizzato - anodized aluminium nbr Pistone - Piston Magnete - Magnet plastofferite - rubber magnet ottone -...

Open the catalog to page 2

CHIAVE DI CODIFICA KEY CODE normalmente aperta normally open normalmente aperta magnetica magnetic normally open normalmente chiusa normally closed normalmente chiusa magnetica magnetic normally closed doppio effetto double acting doppio effetto magnetico magnetic double acting doppio effetto con perno posteriore double acting with rear pin SERIE - SERIES pinza pneumatica ad apertura angolare pneumatic angular gripper FORZA TEORICA DI BLOCCAGGIO (P=6bar) THEORETICAL LOCKING FORCE (P=6bar) FORZA DI BLOCCAGGIO [KG] LOCKING FORCE [KG] Pressione di esercizio [BAR] Working pressure [BAR] La forza...

Open the catalog to page 3

PINZE PNEUMATICHE PNEUMATIC GRIPPERS PINZE PNEUMATICHE

Open the catalog to page 4

PINZE PNEUMATICHE PNEUMATIC GRIPPERS

Open the catalog to page 5

PINZE PNEUMATICHE PINZE PNEUMATICHE

Open the catalog to page 6

PINZE PNEUMATICHE PNEUMATIC GRIPPERS M3x

Open the catalog to page 7

PINZE PNEUMATICHE PINZE PNEUMATICHE

Open the catalog to page 8

PINZE PNEUMATICHE PNEUMATIC GRIPPERS M5x

Open the catalog to page 9

PINZE PNEUMATICHE

Open the catalog to page 10

ARTEC SRL Via Pisacane, 15 - 44042 CENTO (FE) - ITALY T + 3 9 0 5 1 6 8 3 6 2 2 0 - F + 3 9 0 5 1 6 8 3 0 8 82 inf o @ar t e c - pn e u m a t i c . c o m - w w w. a r t e c - p n eumatic .c om progetto e produzione made in italy since 1982

Open the catalog to page 11