Motor Body Repair ergoweld 13k 13000A - 400V Inverter spot welder The ergoweld 13K is a welder using medium frequency technology (inverter). It is more powerful than the original version, with a navigation software even more evaluate (including data recording and extraction function) and a water circuit cooling cables, electrodes and diode bridge thanks to a high power integrated cooler to answer the specifications of automotive builders. I C gun : Air cooled Up to 250 daN at 7 bars Secondary cables L=3m 360° rotating arm I SXR gun : Water cooled Double stroke cylinder 520 daN at 7 bars Standard arms until 400mm Secondary cables L=2,5m I Single sided gun : Air cooled, Secondary cables L=3m, For welding on 1 side (or for dent pulling with accessory kit in option) Models ARO Reference Equipment SXR ZUR187204 + Kit HMI04038 SXR gun, 1 air cooled single sided gun & earth pad with 3m cables 1 telescopic hanger, 1 integrated water cooler and its accessories SXR/C ZUR187205 + Kit HMI04037 SXR gun, 1 non-cooled C gun 3m cable, 1 non-cooled single sided gun & earth pad 3m cables, 2 telescopic hangers, 1 integrated water cooler and its accessories Accessories kit Quality without compromise

ergoweld... Adaptive Ready Adaptive ready concept: Analysis in real time of dynamic resistance during a weld cycle is calculated from the secondary current and voltage of the weld gun. This allows the Adaptive Weld system to automatically adapt the weld parameters to suit the assembly being welded. ■ Welding of different sheet combinations without programme change : eliminates programme selection ■ Stronger weld assembly, specially with HLE, THLE, Trip panels ■ Simplified and reduced programming ■ Welding of glued or insulated panels ■ Automatic electrode wear compensation ■ Management and recording...