Ideal for General Industrial and OEM installation applications. Non-Metallic and Metallic Diaphragm Pumps Low-Ratio Piston Pumps Specialty Pumps Ingersoll Rand Industrial Technologies

Introducing the New High-Performance Pro’s: PD05, PD03 Unbalanced valve design eliminates valve centering and pump stall-outeven under low air inlet pressures. Diaphragm Moving from Left to Right Diaphragm Moving Right to Left A B “D” Valve B A Provides a positive seal. Helps insure optimum energy efficiency while avoiding costly air “blow-by.” C C Ceramic construction insures long service life. “SimulShift™” Valve Provides an ultra-positive, reliable shift signal that avoids stall-out. Provides faster pump trip-over with more flow. Faster trip-over with less pulsation and superior laminar material...

Big Delivery. High-Performance. The best-selling 1/2-inch diaphragm pump in the world, just got better! Productivity Maximized flow rates + Minimized pulsation and air consumption = Maximum Performance Versatility Multiple porting options available along with interface options allow you to customize this pump specifically to your OEM application. Reliability Lube Free Patented Differential Valve both on Major air valve and Simulshift (Pilot Valve) provides reliable Worry Free Operation – Fluid On demand every time Environmentally Sound Bolted Construction in conjunction with a wide range of material...

Numerical Index Pro-Series Pumps MODEL DESCRIPTION PAGE 104104-N02 Pump Speed Control 52 104104-N04 Pump Speed Control 52 104104-N06 Pump Speed Control 52 59916-1 Pneumatic Liquid Level Sensor 52 59916-2 Pneumatic Liquid Level Sensor 52 612041-X 1:1 Ratio Piston Pump 32 612042-1 1:1 Ratio Piston Pump 32 637010 Fluid Section Service Kit 37 637010^ Fluid Section Service Kit 37 637010-6 Fluid Section Service Kit 37 637081 Fluid Section Service Kit 32 637083 Fluid Section Service Kit 32 637119-XX-C Fluid Section Service Kit 22 637124-XX Fluid Section Service Kit 24 637161-XX-C Fluid Section Service...

Model Overview: Non-Metallic Models Pro-Series Pumps Fluid Ports 3/8" (F) - In/Out 1/2" (F) - In/Out 3/4 -14 N.RT.F-1 1" ANSI/DIN Flange 1-1/2" ANSI/DIN 2" ANSI/DIN Inlet/Outlet Rp 3/4(3/4-14 BSR parallel) 1" (F) Threaded Flange Flange Materials Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Construction Acetal Acetal PVDF PVDF lbs. (kg.) 4.5 (2.0) PD03P-XKS-X 6.8 (3.1) PD05P-XKS-X-B Cast Iron Center Cast Iron Center Cast Iron Center

3/8" Non-Metallic Models Pro-Series Pumps 3/8" Non-Metallic Performance Specifications Ratio: Maximum Flow: Displacement per cycle: Air Inlet: (Female) Fluid Inlet: 1:1 10.6-g.p.m. (40.1-l.p.m.) 8.7 (32.9) Flex check 0.022-Gallons (0.083-Liters) .013 (0.068) Flex check 1/4 - 18 P . SAE Short .T.F 3/8 - 18 N.P . - 1 .T.F , Rp 3/8 (3/8 - 19 BSP parallel) Fluid Outlet: 3/8 - 18 N.P . - 1 .T.F Rp 3/8 (3/8 - 19 BSP parallel) , Max. operating pressure: 100-psi (6.9-bar) Suspended solids max. dia.: 1/16-in. (1.6-mm) Flex check (Fibers) Weight: lbs (kg) PD03P-XDS-XXX 4.2 (1.9) PD03P-XES-XXX 4.3 (1.9)...

3/8" Non-Metallic Dimensions and Flow Curves Pro-Series Pumps 3/8" Non-Metallic Dimensions and Flow Charts RJ Exhaust Port 112 -14 N.P.T.F. -1 - PERFORMANCE CURVES PD03P-XXS-XXX 3/8" NON-METALLIC DIAPHRAGM PUMP CAPACITY IN U.S. GALLONS PER MINUTE FLOW RATE (LITERS / MIN.) Refer to www.fluids.ingersollrand.com for full size flow curves. For additional information contact Dual Inlet/Outlet Kits: NOTE: Dimensions are shown in inches and (mm), supplied for reference only and are typically rounded up to the nearest 1/16 inch.

1/2" Non-Metallic Models Pro-Series Pumps 1/2" Non-Metallic Performance Specifications Ratio: Maximum Flow: Displacement per cycle: Air Inlet: (Female) Fluid Inlet: 1:1 14.4-g.p.m. (54.5-l.p.m.) .039-Gallons (.15-Liters) 1/4 - 18 P . SAE Short .T.F 1/2 - 14 N.P . - 1 .T.F , Rp 1/2 (1/2 -14 BSP parallel) 1/2 - 14 N.P . - 1 .T.F Rp 1/2 (1/2 -14 BSP parallel) , 100-psi (6.8-bar) 3/32” (2.4-mm) PD05P-XDS-XXX-B 6.3 (2.9) PD05P-XES-XXX-B 6.7 (3.0) PD05P-XKS-XXX-B 6.8 (3.1) PD05P-XLS-XXX-B 7.2 (3.3) PD05P-XPS-XXX-B 5.2 (2.4) PD05P-XRS-XXX-B 5.4 (2.5) Fluid Outlet: Max. operating pressure: Suspended...

1/2" Non-Metallic Dimensions and Flow Curves Pro-Series Pumps 1/2" Non-Metallic Dimensions and Flow Charts PERFORMANCE CURVES PD05P-XXS-XXX-B 1/2" NON-METALLIC DIAPHRAGM PUMP ' Material Inlet NOTE: Dimensions are shown in inches and (mm), supplied for reference only and are typically rounded up to the nearest 1/16 inch. CAPACITY IN U.S. GALLONS PER MINUTE FLOW RATE (LITERS / MINJ Refer to www.fluids.ingersollrand.com for full size flow curves. For additional information contact Dual Inlet/Outlet Kits:

3/4" Non-Metallic Models Pro-Series Pumps 3/4" Non-Metallic Performance Specifications Ratio: Maximum Flow: Displacement per cycle: Air Inlet: (Female) Fluid Inlet: Fluid Outlet: Max. operating pressure: Suspended solids max. dia.: Weight: lbs (kg) Maximum dry suction lift: ft (m) 1:1 14.8-g.p.m. (56-l.p.m.) .032-Gallons (0.12-Liters) 1/4 - 18 P . SAE Short .T.F 1/2 - 14 N.P . - 1 .T.F , Rp 1/2 (1/2 -14 BSP parallel) 3/4 - 14 N.P . .T.F Rp 3/4 (3/4 -14 BSP parallel) , 100-psi (6.9-bar) 3/32” (2.4-mm) 5.61 (2.54) 15.0 (4.5) Ordering Menu PD07 P Model Series Center Section Material Standard - X...

3/4" Non-Metallic Dimensions and Flow Curves Pro-Series Pumps 3/4" Non-Metallic Dimensions and Flow Charts R E P F PD07P-XPS-PXX 3/4” NON-METALLIC DIAPHRAGM PUMP ’ 100 8 12 16 20 AIR CONSUMPTION IN SCFM 70 Performancebased on water at ambient temperature. 200 60 DIMENSIONS 75 150 G N 100 A B C 50 D E 25 D 0 L K C M H PD07P-XPS-PXX 3/4” NON-METALLIC DIAPHRAGM PUMP ’ Q 8 100 12 20 16 J AIR CONSUMPTION IN SCFM 70 Performancebased on water at ambient temperature. Air inlet 1/4 - 18 200 F. SAE Short P.T. T.F. R E 75 P 60 L M N P r - 1-15/16" (48.9mm) - 3/8"(9.6 mm) - 6-5/16" (160.5mm) 25 - 8-7/8"...