BANDSAW
8Pages

Our HBS 230 ANC bandsaw with distinct advantages: ffFully NC controlled or semi-automatic operation ffSaw band speeds (40/80 m/min) ffSwivelling console with LCD control panel ffMinimum residual piece length of 180 mm, smallest possible diameter of 5 mm ffRobust saw frame made of sturdy cast-iron (torsionally stiff) ffFeed vice mounted on linear guides ffPrecise, ground carbide saw blade guides, adjustable ffHydraulic cutting feed incl. automatic cutting pressure regulation ffFeed accuracy of 0.2 mm ffFully automatic machine designed for best cutting results of profiles and solid materials...

ffPortable bandsaw ffHydraulic saw frame lowering with rapid traverse function ffBandsaw with hydr. lowering (via control valve) ffFor mitre cuts from 0° to 60° right/45° left ffRevolving chip removal brush ff2 sawing speeds ffFor mitre cuts from 0° to 60 ffSaw blade cooling at the point of machining ffCast iron vice with quick release lever ffMechanical saw blade tensioning with electronic power band break monitoring ffSaw frame made of sturdy cast iron ffFor mitre cuts from 0° to 60° right /45° left ffLarge-dimensioned, solid, round support table, co-rotating for mitre cuts with...

ffSemi-automatic bandsaw ffSemi-automatic bandsaw ffSemi-automatic bandsaw ffHydr. opening and closing of the vice (via short-stroke cylinder) ffHydr. opening and closing the vice ffHydr. opening and closing the vice ffBandsaw with hydr. lowering (via control valve) ffBandsaw with hydr. lowering (via control valve) ffFor mitre cuts from 0° to 60° right / left ffFor mitre cuts from 0° to 60° right / left ffHydraulic full-stroke cylinder for vice (low tension version), floating vice ffHydraulic full-stroke cylinder for vice (low tension version), floating vice ffStepless belt speed ffStepless...

ffFully automatic bandsaw (up to 44.9°), from 45° to 60° in semi-automatic mode ffCombination of semi-automatic/automatic highperformance bandsaw for mitre cuts from 0° to 60° right ffFully automatic 2 column horizontal high-performance automatic bandsaw ffSmallest diameter 5 mm ffRemaining length 180 mm ffAutomatic operation only at 0° (according to cutting data) ffAutomatic cutting pressure regulation ffStepped saw band speed ffFeed vice mounted on linear guides ffHydraulic full lift cylinder for floating vice (low tension version) ffIntegrated material feeder in automatic operation...

ffFully automatic 2 column horizontal high-performance automatic bandsaw ffVertical bandsaw ffCutting width 400 mm and height 390 mm ffSwivelling head for mitre cuts ffLED work light ffQuick clamping vice with counter-clamping device for double workpiece clamping ffSmallest workpiece diameter 10 mm ffRemaining residual piece length 20 mm ffHydraulic full lift cylinder for floating vice (low tension version) ffLongitudinal stop (optional) ffMinimum quantity lubrication (optional) ffFully hydraulic sawing process: Material feed (via slide bearing), feed length up to 600 mm ff3-sided precision...

Arnz FLOTT GmbH Werkzeugmaschinen Vieringhausen 131 42857 Remscheid | Germany Phone +49 2191 979-0 Fax +49 2191 979-222 info@flott.de www.flott.de All prices exclude shipping and handling costs, as well as the applicable VAT. 01_04_2020_GB. www.punktuell-werbeagentur.de Subject to technical modifications and additional information on www.flott.de Customer Service