Free Floating Lever Air/Gas Vents—Forged Steel For Pressures to 1,000 psig (69 bar) or Specific Gravity Down to 0.40 A 32-AV, 33-AV and 36-AV—Forged steel vents using the same proven free floating lever mechanisms used in Armstrong steam traps. For applications where high air/gas venting capacity is required up to 1,000 psi. Available with screwed, socketweld or flanged connections. For a fully detailed certified drawing, refer to CD #1035. List of Materials Model No. 32-AV 33-AV 36-AV Valve & Seat Leverage System ASTM A105 Forged Steel Stainless Steel Bolts ASTM A193 Gr. B7 Nuts ASTM A194 Gr. 2H Physical Data Pipe Connections “A” “B” “D” “K” “L” Approx. Wt. lb (kg) Max. Allow. Pressure (Vessel Design) †Available in Type 316 SS. Consult factory. Pipe size of side connections if provided is same as that of inlet and outlet connections. Some floats are oil filled. Consult factory for details. Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit armstronginternational.com for up-to-date information. North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim armstronginternational.com

Free Floating Lever Air/Gas Vents—Forged Steel For Pressures to 1,000 psig (69 bar) or Specific Gravity Down to 0.40 High-Temperature Service Maximum allowable working pressures of floats decrease at temperatures above 100°F. Allow for approximately: • 10% decrease at 200°F • 15% decrease at 300°F • 20% decrease at 400°F The float is not always the limiting factor, however. Consult with Armstrong Application Engineering if you have a high-temperature application that also requires maximum operating pressures. Forged steel and stainless steel traps can be modified to resist hydrogen sulfide stress...