Tel. +39 0341 240269 | [email protected] www.armeco.it | www.armecoshop.it Via delle Bazzone, 2 | 23851 Galbiate (LC) Scrap holder bucket / ART. CR/400 Technical data Width 100 cm Depth 130 cm Height 113,5+20 cm Capacity 800 kg - 400 l Technical description Metal buckets made of sturdy tubular and steel metal sheets. Complete with two rubber shock absorbers for rotation cushion shocks. It is to be used for the recovery and transport of any processing scrap of loose materials or agglomerates. The tank can be watertight welded to prevent the drain of fluids during handling. The two fixed wheels and the two swivel wheels mounted on ball bearings allow easy manual handling. The bucket is equipped with forking. The command lever allows an easy 120° rotation with gradual discharge of contents; the operator does not need to get off the forklifts to perform this operation. Upon request , the bucket can be supplied with a lid. RAL 5015 blue colour coating. ©2021 | ARMECO - Arredamenti Metallici Corti s.r.l. Via delle Bazzone, 2 | 23851 Galbiate (LC) | Tel. +39 0341 240269 | [email protected] P.Iva 02177600968 | REA LC-231061 | Cap. Soc. 10.400,00 i.v.