Medium driven 360° jet cleaner • operating pressure: cleansing medium 3 - 10 bar / 43.5 - 145 psi • volume flow rate: 3.9 - 10 m³/h / 17 - 44 gpm (US) * • cleaning radius max. 4 m, wetting radius max. 5 m • insertation opening: min. 125 Ø mm *depending on model and cleansing medium Medium driven 360° jet cleaner • operating pressure: cleansing medium 5 - 13 bar / 73 - 189 psi • volume flow rate: 14.3 - 27.6 m³/h / 63 - 122 gpm (US) * • cleaning radius max. 3.5 m • wetting radius max. 7 m *depending on model and cleansing medium Medium driven 360° jet cleaner • operating pressure: cleansing medium 3.5 - 13 bar / 51 - 189 psi • volume flow rate: 8.1 - 29.4 m³/h / 36 - 129 gpm (US) * • cleaning radius max. 2.5 m • wetting radius max. 5 m *depending on model and cleansing medium Medium driven 360° jet cleaner • operating pressure: cleansing medium 3 - 20 bar / 43.5 - 290 psi • volume flow rate: 2.2 - 6.5 m³/h / 10 - 29 gpm (US) * • cleaning radius max. 2 m • wetting radius max. 4 m *depending on model and cleansing medium 360° jet cleaner with external drive • operating pressure: cleansing medium 2 - 20 bar / 29 - 290 psi • volume flow rate: 0.6 - 7.2 m³/h / 3 - 32 gpm (US) • cleaning radius max. 1.5 m • wetting radius max. 4 m • slow and constant rotation 360° jet cleaner with external drive • operating pressure: cleansing medium 2 - 20 bar / 29 - 290 psi • volume flow rate: 0.2 - 2.5 m³/h / 1 - 11 gpm (US) • cleaning radius max. 0.5 m • wetting radius max. 1.5 m • slow and constant rotation Slowly rotating jet cleaner • operating pressure: cleansing medium 3 - 12 bar / 43.5 - 174 psi • volume flow rate: 2.5 - 6.5 m³/h / 11 - 29 gpm (US) • cleaning radius max. 2 m • rotation: 2 - 30 U/min (RPM) • connection: thread and clipon Spate cleaner • operating pressure: cleansing medium 1.5 - 3 bar / 22 - 43.5 psi * • volume flow rate: 0.25 - 18 m³/h / 1 - 79 gpm (US) * • cleaning radius max. 0.1 - 3 m * • double ball-bearing *depending on model and cleansing medium Rotating spray ball • operating pressure: cleansing medium 1.5 - 3 bar / 22 - 43.5 psi * • volume flow rate: 2.4 - 28.9 m³/h / 11 - 127 gpm (US)* • cleaning radius max. 0.5 - 2.5 m * • spray ball supported in double ball-bearing *depending on model and cleansing medium Static spray ball • operating pressure: cleansing medium 0.5 - 2.5 bar / 7 - 36 psi * • volume flow rate: 0.6 - 78.7 m³/h / 2.6 - 346 gpm (US) * • cleaning radius max. 0.25 - 3 m * • connection: clipon, thread and weldon *depending on model and cleansing medium Dynamic retractor • operating pressure: cleansing medium 1 - 3 bar / 14.5 - 43.5 psi * • volume flow rate: 2 - 6.5 m³/h / 8.8 - 28.6 gpm (US) * • stroke length: 100, 150, 250 and 500 mm • process connection: in clamp and welding version available *depending on model and cleansing medium Spate cleaner and retractor • 3-A designed • connection TANKO® SF: clipon or weldon • connection TANKO® RTF: combination adapter or weldon • low wear PEEK body • hydrodynamic bearing, drainable Information Requirements for Choosing a Cleaning Device baked on / very sticky CIP fluid and CIP cycle Flow rate and pressure at point of use Pressurised or vacuumed vessel Soiling Level Properties of the product in the vessel to be cleaned Vessel characteristics (height, length, diameter) Vessel internals (mixers, hoppers, etc.) TANKO-JM TANKO-JX TANKO-CP2 TANKO-S TANKO-RB Statik B TANKO-RT TANKO-SF TANKO-RTF CIPGuard light rinsing

Armaturenwerk Hötensleben GmbH EHEDG CONFORM CIPGuard (TCG-ZR) Sensor for monitoring • material: 316L (1.4404), PEEK, 304 (1.4301), 303 (1.4305), EPDM • supply voltage: Ub = 24 V +/-20 % (18 to 32 VDC) • power requirement: < 20 mA • output signal: PNP; 50 mA, short circuit-proof • start-up delay: < 0.3 sec, connection: G1/2" • operating pressure: cleansing medium 1 - 3 bar / 15 - 43.5 psi * • flow rate: 1.3 - 2.5 m³/h / 6 - 11 gpm (US) * • ball bearing (1.4401) or plain bearing (PEEK) • reduces the spray shadows to a minimum • spray angle: 360°, optional with downpipe rinsing *depending on model...