USCX200
14Pages

flow systems Hand-Held Clamp-On Ultrasonic Flowmeter

THE TECHNOLOGY BEHIND THE MEASUREMENT The USCX series non-invasive flowmeters work on the transit time ultrasonic principle. This involves sending and receiving ultrasonic pulses from a pair of sensors and examining the time difference in the signal. We use clamp-on transducers that are mounted externally on the surface of the pipe and which generate pulses that pass through the pipe wall. The flowing liquid within causes time differences in the ultrasonic signals, which are then evaluated by the flowmeter to produce an accurate flow measurement. The key principle of the method applied is...

SPECIFICATION • Pipe diameter range 10 mm to 6,500 mm • Temperature range for sensors -30 °C to +250 °C (-22 °F to +482 °F) • Weight 650 g • Robust IP 65 enclosure with added rubber shock protector • Selectable three-line LCD display and full keypad • Battery life up to 24 hours with standard NiMH AA batteries for simple replacement FEATURES • Lightweight and tactile for easy one-handed use • Stainless steel sensors, cable and connectors as standard • Innovative installation wizard for quick and intuitive programming • Full instrument diagnostics and scope function • Large data logger and...

USCX200 Technical Data FLOWMETER Performance Measurement principle Flow velocity range Resolution Repeatability Accuracy Turn down ratio Measurement rate Response time Damping of displayed value Gaseous and solid content of liquid media Ultrasonic transit-time difference 0.01... 25 m/s 0.25 mm/s 0.15 % of measured value, ±0.015 m/s Volume flow: ±1... 3 % of measured value depending on application ±0.5 % of measured value with process calibration Flow velocity (mean): ±0.5 % of measured value 1/100 (equivalent to 0.25... 25 m/s) 100 Hz (standard) 1 s 0... 99 s (selectable by user) < 10 % of...

General Enclosure type Operating temperature Housing material Measurement channels Power supply Internal rechargeable batteries: 4 x NiMH AA 2850 mAh Power adapter: 100 ... 240 V AC input, 9 V DC output External battery pack: 12 V 105 Ah, 25 kg (optional) Operating time Up to 24 h with fully charged internal batteries LCD graphic display, 128 x 64 dots, backlit 228 (h) x 72/124 (w) x 58 (d) mm (without cable glands) Power consumption Operating languages English, French, German, Dutch, Spanish, Italian, Russian, Czech, Turkish, Romanian (others on request) Communication Type Transmitted data...

USCX200 Technical Data Internal data logger Storage capacity Logged data Approx. 30,000 measurements (each comprising up to 10 selectable measurement units), loggersize 5 MB Approx. 100,000 measurements (each comprising up to 10 selectable measurement units), loggersize 16 MB All measured and totalised values, parameter sets Operating systems Download of measured values/parameter sets, graphical presentation, list format, export to third party software, online transfer of measured data Windows 8,7, Vista, XP, NT, 2000 Linux Quantity and units of measurement Volumetric flow rate Flow...

USCX200 Technical Data TRANSDUCERS K1L, KIN, K1E Pipe diameter range Dimensions of sensor heads Material of sensor heads Material of cable conduits Temperature range 50... 3,000 mm for type KIN/E 50... 6,500 mm for type K1L 60 (h) x 30 (w) x 34 (d) mm Stainless steel Type K1L: PVC TypeKIN/E: Stainless steel Type K1L: -30... +80 °C (-22... +176 °F) (for short periods up to +300 °C (+572 °F)) IP 66 according to EN 60529 (IP 67 and IP 68 on request) Standard cable lengths

Pipe diameter range Dimensions of sensor heads Material of sensor heads Material of cable conduits Temperature range Type K4N/E: Stainless steel Type K4L: -30... +80 °C (-22... +176 °F) Degree of protection IP 66 according to EN 60529 (IP 67 and IP 68 on request) Standard cable lengths TypeK4L: 5.0 m K4N/E transducers with ODU/LEMO connector

TRANSDUCER MOUNTING ACCESSORIES General Diameter range and mounting types Clamping set (metal strap with screw), stainless steel: DN 10 ... 40 Clips and chains, chain length 1 m, stainless steel: DN 15 ... 310 Clips and chains, chain length 2 m, stainless steel: DN 25 ... 600 Clips and chains, chain length 4 m (2 x 2 m), stainless steel: DN 25 ... 1,200 Textile tension straps, up to 15 m in length: DN 1,000 ... 3,000 (6,500) Mounting clip and chains for use with portable flowmeter Mounting clip Transducers mounted using chains and clips

General Diameter range and mounting types Mounting fixture, rail and magnets (for type K4) DN 10 ... 250 Mounting fixture, rail and magnets (for type K1) DN 50 ... 3,000 Mounting fixture for flexible hoses Custom made mounting bracket, stainless steel (available on request) Mounting fixture, rail and magnets Mounting fixture, rail and magnets Example of mounting fixture for flexible hoses

WALL THICKNESS GAUGES (OPTIONAL) Wall thickness gauge NT Temperature range Measuring range Cable length Wall thickness gauge HT Temperature range Measuring range Cable length Wall thickness gauge NT Wall thickness gauge NT with USCX200 in use Wall thickness gauge HT in use

USCX200 Technical Data TRANSPORT ACCESSORIES Crush-proof transport case Dimensions (external) Weight (empty) Outside material Polypropylene/resin compound Inside material High-density polyurethane foam Soft transport case Dimensions (external) Weight (empty) Outside material Inside material Crush-proof IP 67 transport case USCX200 soft transport case

USCX200 Configuration Code FLOWM ETER AN D ACCESSORIES USCX200 Hand-held USCX200, one measurement channel, serial interface RS 232, operating instructions Configuration 0 Basicunitwithoutaccessories 1 With crush-prooftransportcase IP 67, power adapter/battery charging unit, measuringtape 2 With soft case, power adapter/battery charging unit, measuringtape Internal code 03 Internal code Power adapter 0 Without 1 UK 2 US 3 Europe 4 Australia Z Special (please specify) Degree of protection 1 IP 65 (standard) 2 IP67 (transport case with externaltransducerconnections) Z Special (please specify)...