USCX100
13Pages

Technical datasheet f*(/m ’TJteaAunmiertt & (fatfaat Sfaecialtit&

THE TECHNOLOGY BEHIND THE MEASUREMENT The USCX series non-invasive flowmeters work on the transit time ultrasonic principle. This involves sending and receiving ultrasonic pulses from a pair of sensors and examining the time difference in the signal. We use clamp-on transducers that are mounted externally on the surface of the pipe and which generate pulses that pass through the pipe wall. The flowing liquid within causes time differences in the ultrasonic signals, which are then evaluated by the flowmeter to produce an accurate flow measurement. The key principle of the method applied is...

Fixed Installation - 30‘c+80 Bn, SPECIFICATION • Pipe diameter range 10 mm to 3,000 mm • Temperature range for sensors -30 °C to +80 °C (-22 °F to +176 °F) • Weight 750 g • Robust IP 66 aluminium enclosure • Sturdy unit with LCD display and five-key keypad • Wall or pipe mounted FEATURES • Low cost of ownership • Process outputs including RS 485, Modbus RTU and HART* compatible output • PT100 inputs for heat quantity (thermal energy) measurement • Bi-directional measurement with totaliser function • Innovative installation wizard for quick and intuitive programming • Configuration can be...

USCX100 Technical Data TRANSMITTER Performance Measurement principle Flow velocity range Resolution Repeatability Accuracy Turn down ratio Measurement rate Response time Damping of displayed value Gaseous and solid content of liquid media Ultrasonic transit-time difference 0.01... 25 m/s 0.25 mm/s 0.15 % of measured value, ±0.015 m/s Volume flow: ±1... 3 % of measured value depending on application ±0.5 % of measured value with process calibration Flow velocity (mean): ±0.5 % of measured value 1/100 (equivalent to 0.25... 25 m/s) 100 Hz 1 s (standard), 90 ms (optional) 0... 99 s (selectable...

USCXIOO Technical Data General Enclosure type Degree of protection Operating temperature Housing material Measurement channels Power supply Display Dimensions Weight Power consumption Operating languages Wall mounted, optional pipe stands and brackets available IP 66 according to EN 60529 -10... +60 °C (+14... +140 °F) Die-cast aluminium 1 100 ...240 VAC, 50/60 Hz 9...36V DC Special solutions (e.g. solar panel, battery) on request LCD graphic display, 128 x 64 dots, backlit 120 (h) x 160 (w) x 81 (d) mm (without cable glands) Approx. 750 g < 5 W English, French, German, Dutch, Spanish,...

USCXIOO Technical Data Data+ software Functionality Download of measured values/parameter sets, graphical presentation, list format, export to third party software, online transfer of measured data Operating systems Windows 8,7, Vista, XP, NT, 2000 Quantity and units of measurement Volumetric flow rate Flow velocity Mass flow rate Volume Mass Heat flow Heat quantity Temperature m3/h, m3/min, m3/s, l/h, l/min, l/s USgal/h (US gallons per hour), USgal/min, USgal/s bbl/d (barrels per day), bbl/h, bbl/min m/s, ft/s, inch/s g/s, t/h, kg/h, kg/min m3, l, gal (US gallons), bbl & kg, t W, kW, MW...

USCX100 Technical Data TRANSDUCERS K1P, K1L Pipe diameter range Dimensions of sensor heads Material of sensor heads Type K1P: Plastic Type K1PL: Stainless steel Material of cable conduits Temperature range Standard cable lengths K1P transducers mounted using straps and clamps

Pipe diameter range Dimensions of sensor heads Material of sensor heads Material of cable conduits Temperature range Degree of protection Standard cable lengths 50 ... 100 mm for type K4P 10 ... 250 mm for type K4L Type K4P: 30 (h) x30 (w) x30 (d) mm Type K4L: 42 (h) x 18 (w) x 22 (d) mm Type K4P: Plastic Type K4P/L: PVC Type K4P: -20 ... +50 °C (-4 ... +122 °F) Type K4L: -30 ... +80 °C (-22 ... +176 °F) IP 66 according to EN 60529 (IP 67 and IP 68 on request) Type K4P/L: 5.0 m

USCXIOO Technical Data Extension cable Available lengths Cable type Material of cable jacket Operating temperature Minimum bend radius Cable connection Connection types Termination into transmitter Junction box Direct cable connection (terminal block) Datasheet USCXIOO www.arkon.co.uk 9/13

USCX100 Technical Data TRANSDUCER MOUNTING ACCESSORIES General Diameter range and mounting types Clamping set (metal strap with screw), stainless steel: DN 10 ... 40 Metallic straps and clamps: Metallic straps and clamps: Metallic mounting rail and straps (available on request): DN 50 ... 250 or DN 50 ... 3,000 Mounting fixture for flexible hoses Custom made mounting bracket, stainless steel (available on request) Metallic mounting rail with transducers Example of mounting fixture for flexible hoses

PT100 CLAMP-ON SENSORS General Type Measurement range Response time Dimensions of sensor heads Material of sensor heads Material of cable jacket Cable length PT100 transducer fixed to pipe PT100 with wired cable connection

USCXIOO Configuration Code TRANSMITTER AND ACCESSORIES USCXIOO Ultrasonic flow transmitter USCXIOO, one measurement channel, serial interface RS 232, operating instructions Configuration 2 With LCD graphic display, 128x64 dots, backlit and 5-key keypad Internal code 03 Internal code Power supply 1 100... 240 VAC, 50/60 Hz Z Special (please specify) Enclosure type 1 Die-cast aluminium, wall mounted, IP 66 Z Special (please specify) Communication 0 Without 1 RS 485 serial interface Z Special (please specify) Process inputs/outputs (select a maximum of 4 slots) N Without C Current output,...

USCXIOO Configuration Code TRANSDUCERS AND ACCESSORIES K4L Transducer pair, pipe diameter range 10... 250 mm, process temperature -30... +80 °C, including acoustic coupling paste K4P Transducer pair, pipe diameter range 50... 100 mm, process temperature -20... +50 °C, including acoustic coupling paste KIP Transducer pair, pipe diameter range 50 ...500 mm, process temperature-20...+50 °C, including acoustic coupling paste K1L Transducer pair, pipe diameter range 50... 3,000 mm, process temperature -30... +80 °C, including acoustic coupling paste Z Special (please con suit factory) Internal...