B045

B045

Product catalog summary
Overview
The document provides technical specifications for the B045 Industrial Motherboard, featuring an Intel Cedar Trail 1.86GHz N2800 Atom CPU. It is designed for industrial applications with a compact form factor of 7.40 x 6.54 inches (188 x 160 mm).
Processor System
The motherboard is equipped with an Intel 1.86GHz N2800 Dual Core Atom CPU, featuring two cores and a maximum speed of 1.86GHz. It utilizes the N2800 chipset (CPU + Northbridge) and NM10 (Southbridge), with an AMI BIOS.
Memory
It supports DDR3 memory technology with a maximum capacity of 4GB, using a single SO-DIMM socket. The supported memory speeds are 800/1066MHz.
Graphics
The graphics controller is integrated into the Intel NM10 Express Chip, supporting a maximum resolution of 1920x1080 for both VGA and HDMI outputs. Multi-display capability is supported.
Ethernet
The motherboard includes two Gigabit Ethernet LAN ports, utilizing the Realtek RTL8111F controller, with 10/100/1000 Mbps interface and two RJ-45 connectors.
Storage and Expansion
It features two SATA2 ports with a maximum data transfer rate of 3.0Gb/s and one Mini-PCIe slot. There are no PCI, mSATA, or PCIe slots available.
Rear I/O
The rear I/O includes one VGA, one HDMI, two Ethernet ports, six USB 2.0 ports, and audio jacks for mic-in and line-out.
Internal Connectors
Internally, it provides one USB header (supporting two USB 2.0 ports), one VGA, and a smart battery header. There are no serial, parallel, or GPIO connectors.
Power Requirements
The motherboard requires a 12V DC-IN power supply with a maximum power consumption of 24W.
Environmental Specifications
It operates within a temperature range of 0-60ºC (32-140ºF) and can be stored at temperatures between -40-85ºC (-40-185ºF). It supports a relative humidity range of 0-95%.
Watchdog Timer
A programmable watchdog timer is available, ranging from 1 to 255 seconds.
See more

Catalog excerpts

B045-1

B045 Industrial Motherboard SBC With Intel Cedar Trail 1.86GHz N2800 Atom CPU Features • Intel Cedar Trail 1.86GHz N2800 dual core Atom Processor. • Intel NM10 Express chipset. • Single DDR-3 SO-DIMM supports up to 4GB 800/1066MHz DDR3 memory. • Intel Embedded Graphic Engine integrated in Intel NM10 chip. • VGA + HDMI. • Two Realtek RTL8111F Gigabit LAN ports. • 2 x SATAII, 1 x MINI-PCIE slot. • 6 USB 2.0, one VGA, one HDMI, one Mic-in, one Line-out, two Gigabit LAN ports on board edge. Form Factor Dimensions Processor system CPU Core Number Max Speed Chipset BIOS Intel 1.86GHz N2800 Dual Core Atom CPU 2 1.86GHz N2800 (CPU + Northbridge) + NM10 (Southbridge) AMI BIOS Expansion slots PCI Mini-PCIe mSATA PCIe CFast Card Socket Memory Technology Max. Socket Graphics Controller VRAM VGA LVDS HDMI DVI Display Port Multi Display Integrated in Intel NM10 Express Chip Shared Memory Supports max. resolution 1920x1080 N/A Supports max resolution 1920x1080 N/A N/A YES Ethernet Interface Controller Connector SATA Max Data Transfer Rate SATA2 (3.0Gb/s) VGA DVI HDMI DisplayPort Ethernet USB Audio Serial eSATA PS/2 Internal Connector USB LVDS / inverter VGA Serial SATA mPCIe Parallel mSATA GPIO 8-bit SATA PWR Output Con Speaker Header Smart Battery Header SIM card Stackable I/O Layer1 Layer2 Watchdog Timer Watchdog Timer Power Requirements Power Requirement (Max) 12V DC-IN Power Consumption (Max) 24W Environment Operating Temperature 0-60ºC (32~140ºF) Storage Temperature -40~85ºC (-40~185ºF) Relati

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.