Catalog excerpts
Electrical actuator for industrial applications
Open the catalog to page 1The Allrounder – Compact and robust Classic actuator technology With the Nano+ series ARIS offers a new generation of robust actuators in the smallest possible space. Powder-coated housing and hoods ensure safe and reliable operation even in harsh industrial environments. The practical and optimized design of the Nano+ manages a comfortable setting and a fast electrical connection. The classic actuator technology with synchronous or DC motor ensures easy replacement of actuators in existing circuits and plants. From the outset the design has been considered all market standard options, so...
Open the catalog to page 2Minimal base area – Compact design up to 120 Nm. „ „For our specific requirements for torque and small spaces the Nano+ is perfectly suitable.“ ATEX zone 2/22 with similar dimensions as the standard type – Ultra compact and cost efficient, since there is no pressurized encapsulation required. „ „In our systems Ex and standard drives are used together. The uniform size facilitates planning.“ Increase efficiency of plants by high precision potentiometer position feedback, thanks to the hollow shaft potentiometer directly mounted on the drive shaft. „With our gas control systems, we attach...
Open the catalog to page 3Type list Type Nano+ S 05-008 Specifications Motor Other values upon request Synchronous motor, short-circuit proof Direct current brush motor Protection class Ambient temperature Housing IP 65 (optional IP 66) –15 °C...+60 °C/optional –40 °C...+80 °C (with PMR: 0 °C...+60 °C) Die cast aluminum (EN AC-44200) powder-coated Position indicator Power supply Additional switches Duty cycle Travel cutoff Switching cams/Micro switches Maintenance Control Lifetime lubrication (maintenance-free) 3-point-step ARIS Stellantriebe GmbH
Open the catalog to page 4Round shaft with cross hole (Standard) D-Shaft (Option) Position indicator optional Cable glands optional (Standard=Blind plugs) Round shaft with feather key (Option) ISO shaft inner 4-square (Option)
Open the catalog to page 5Type list Type Nano+ M 30-60 Nano+ M 30-120 Nano+ M 40-03 Specifications Motor Values in ( ) = 60 Hz Other values upon request Synchronous motor, short-circuit proof Direct current brush motor Protection class Ambient temperature Housing IP 65 (optional IP 66) –15 °C...+60 °C/optional –40 °C...+80 °C (with PMR: 0 °C...+60 °C) Die cast aluminum (EN AC-44200) powder-coated Position indicator Power supply Additional switches Potentiometer Travel optional 30 bis 40 Nm: 10°...150° / 50 bis 60 Nm: 10°...100° (optional Multi-Turn) Duty cycle Travel cutoff Switching cams/Micro switches Lifetime...
Open the catalog to page 6depending on type Cable glands optional (Standard=Blind plugs) ISO shaft inner 4-square (Option) Position indicator optional Round shaft with feather key (Option) Round shaft with cross hole (Standard)
Open the catalog to page 7Type list Type Nano+ L 70-06 Specifications Motor Values in ( ) = 60 Hz Other values upon request. Synchronous motor, short-circuit proof Direct current brush motor Protection class Ambient temperature IP 65 (optional IP 66) –15 °C...+60 °C/optional –40 °C...+80 °C (with PMR: 0 °C...+60 °C) Die cast aluminum (EN AC-44200) powder-coated Position indicator Power supply Additional switches Duty cycle Travel cutoff Switching cams/Micro switches Maintenance Control Lifetime lubrication (maintenance-free) 3-point-step ARIS Stellantriebe GmbH
Open the catalog to page 8Cable glands optional (Standard=Blind plugs) Round shaft with cross hole (Standard) Position indicator optional ISO shaft inner 4-square (Option) F07 ø 70 Round shaft with feather key (Option)
Open the catalog to page 9330° / 180° With threaded pin for safe fixing Automatic disengaging Not rotating with shaft Mechanical position indicator ■ Freely adjustable Optional special resolution for potentiometer and shutoff system For applications with more than 1 revolutions Power supply: Actual value output: 230 V ±10%, 50/60 Hz Special voltages/-frequencies available 0 (4) to 20 mA (DC), optional 0 (2) to 10 V Burden 250 Ω, overload protection 25 mA Reverse voltage protection up to –25 mA Resolution 10 bit Fixed limits: 0 or 4-20 mA (Option 0 or 2-10 V) Current drain, burden max. 500 Ω Resolution 10 bit Two or...
Open the catalog to page 10Options Current output (add-on board) ■ Potentiometer Standard ■ 1 kΩ/10 kΩ ■ Resolution: Nano S+L 90°/180°/320°, Nano M 30...40 Nm 10°...150°, Nano M 50...60 Nm 10°...100° (optional Multi-Turn) Potentiometer refeed acc. to DIN EN 12067-2 ■ Regulation of fuel, air and exhaust streams in combination with electronic compound regulating system ■ Certified actuator and potentiometer ■ Continuous form closure from the actuator shaft to the potentiometer shaft ■ Vibration tested acc. to EN 60068-2-6 ■ Electrical testing of actuator acc. to DIN EN 60730 Parallel relays/Single wire operation (AC) ■...
Open the catalog to page 11More possible applications Linearis N+ ■ Stainless steel high-helix lead screw Ø18 ■ Lead 40 mm with optimized efficiency ■ less turns per stroke length ■ long-life motor ■ slow and smooth motor movement ■ low noise and vibration ■ Holding torque by self-hold of the actuator ■ separately exchangeable actuator ■ High-strength, anodized milled aluminum parts, corrosion resistant and lightweight ■ Long holes for fastening, i.e. easy installation ■ Maintenance-free by dry-run, no lubrication necessary, no dirt deposits on grease (longer life span) ■ Embedded (dry) lubricants inside the lead...
Open the catalog to page 12More possible applications Usable in Ex-Zones 1 and 2 Appliance categories 2G and 3G Flameproof „d“ Usable at gases with increased flame transmission capacity „C“ Highest temperature class T6 For gases with ignition temperature > 85 °C Flange connection Power supply Ambient temperature Cable entry Aluminum (painted), steel (base) Protection class Nano+ Ex (Zone 2/22) II 3G Ex ec IIC T4 Gc X (Zone 2) II 3D Ex tc IIIC T80°C Dc X (Zone 22) Ambient temperature: –15 °C ≤ Ta ≤ 45 °C ■ ■ ■ ■ ■ Compact layout (identical with standard actuator) Small surcharge to standard actuator, lower price than...
Open the catalog to page 13All ARIS Stellantriebe GmbH catalogs and technical brochures
-
RD-K
2 Pages
-
PNEUMATIC CATALOGUE
24 Pages
-
Industrial Valves
44 Pages
-
Electrical Actuators
12 Pages
-
VALVES CATALOGUE
44 Pages
-
ACTUATORS OVERVIEW
12 Pages
-
Actuators ATEX
8 Pages
-
Rotary Drive Nano
8 Pages
-
Electronic Rotary Drive Tensor
12 Pages
-
Rotary Drive Nano Plus
8 Pages
-
Limit Switch Box BE45/BS45
1 Pages
-
Limit Switch Box BE41/BS42
1 Pages
-
Filter Regulator
1 Pages
-
Positioner TZID-C
1 Pages
-
Pneumatic Actuator PD-PE
6 Pages
-
Product Overview Valves
4 Pages
-
Product Overview Actuators
4 Pages
-
Catalogue Industriearmaturen
44 Pages
-
Catalogue Classic Line
16 Pages
-
Catalogue Pneumatikprogramm
24 Pages
-
Limit Switch Box PRB
1 Pages
-
Solenoid Valves
1 Pages
-
Intermediate Gear
1 Pages
-
Ring-type Valve RD-K
2 Pages
-
Ring-type Valve L5-RD
2 Pages
-
Flange-type Valve L6-FD
2 Pages
-
Shut-off Valve AFV
2 Pages
-
Shut-off Valve BARI
2 Pages
-
Gas Shut-off Valve SARI
2 Pages
-
Brass Ball Valve MKH
2 Pages
-
Ball Valve KH 014/015
2 Pages
-
Ball Valve KH 025
2 Pages
-
Ball Valve KH 525/528
2 Pages
-
Mixing Valve ADR
2 Pages
-
Valve RV 102
2 Pages
-
Valve RV 103
2 Pages
-
Valve RV 113
2 Pages
-
Gas Regulating Valve GRK
2 Pages
-
ADR
2 Pages
-
RV 103 / RV 113
2 Pages
-
RV 102 / RV 112
2 Pages
-
KH 525-528
2 Pages
-
KH 025
2 Pages
-
KH 014-015
2 Pages
-
HT-2B
2 Pages
-
AFV
2 Pages
-
BARI
2 Pages
-
HT2-B
2 Pages
-
L6-FD
2 Pages
-
HT-L
2 Pages
-
L5-RD
2 Pages
-
Butterfly valve RD-K
2 Pages