Pressure Switch pmax to 350 bar (5076 PSI) Piston sensing system with soft sealing Leakage free Mechanical service life 10 millions of switching operations Micro switches UL and approved Silver plated contacts in micro switch Basic model for flange mounting Functional Description Pressure switch consists of an aluminum housing, a piston, a prestressed spring and a microswitch. When the pressure corresponding with the spring setting is reached, the switch closes or opens the respective electric circuit. The pressure switch is being supplied with a connector and with two bolts. When delivered with a sandwich plate, the switch can be turned around its length axes by 90°. The subplate can be ordered separately or with the switch. Pressure Switch Adjustable pressure 5... 180 bar (73...2611 PSI) Adjustable pressure 50... 350 bar (725...5076 PSI) without connector with connector Type of subplate without subplate subplate type DP3-TS2-1 G1/4 subplate type DP3-TS2-3 SAE 6 Switching function: One single-pole micro switch (change-over switch) The pressure increase closes contacts on terminalss 1 - 3 and opens contacts on terminals 1 - 2

Technical Data Switching pressure ranges Switching pressure . . . . . at the range beginning difference ca.1) . . . . . . . . . at the range end Adjustable range (Falling pressure ) Adjustable range (Rising pressure ) Materials in the sensing element Stainless Steel, Turcon and NBR 2 Viscosity range Switching element micro switch Hydraulic oils of power classes (HL, HLP) to DIN 51524 ( Petroleum oils (HM,HL,HPL); Phosphate easter fluids(HDF-R)) Hydraulic fluid Ambient temperature range Max. temperature at the switching element Maximum degree of fluid contamination Mounting position 1) Operating...

Pressure Switch Dimensions Model TS3 - XX - 0 1a O-ring 8 x 1,5 - for adjustable pressure max 180 bar - supplied witch each switch 1b O-ring 5 x 1,5 - for adjustable pressure max 360 bar - supplied witch each switch 2 2 mounting bolts M5x60 (tightening torque 5 Nm) supplied with each switch 3 Setting of the switch point (inside HEX 5)

Ordering Code of Sandwich Plates Sandwich plate of the pressure switch Nominal size of the sandwich plate Models of sandwich plates size 06 Models of sandwich plates size 10

Sandwich Plate Dimensions Dimensions in millimetres Sandwich plate Name plate Square ring 9.25 x 1.68 (4 purchase) supplied with each plate Required surface finish of 4 Square ring 12.42 x 1.68 (5 purchase) supplied with each plate Required surface finish of

• The packing foil is recyclable. • The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should not be construed in any case as a guaranteed representation of the product properties in the sense of the E-mail: [email protected] Subject to alteration without notice!