Catalogs >
ARGO-HYTOS >
SR1P2-A2

SR1P2-A2
4Pages

Catalog excerpts

Proportional Directly Operated Pressure Relief Valve 3/4-16 UNF • pmax 350 bar (5076 PSI) • Qmax 1,5 L/min (0.396 GPM) Screw-in cartridge design Direct acting, poppet type Three pressure ranges Pressure output proportional to DC current input Functional Description The valve is designed for continuous regulation of pressure in the circuit. The valve consists of the seat (1), poppet (3), return spring (2), main spring (4), spring support ring (5) and control proportional solenoid (6). In the basic position (with the coil deenergized) the port P is fully open to port T. Proportional increase of DC current at solenoid (6) increase force to valve poppet (3) through preload spring (4). This blocks flow in direction P – T until sufficient pressure is pre-sent to offset electrically induced solenoid force. The minimum value of the cracking pressure can be adjusted using the screw (7), position of which is secured with the nut (8). The adjusting screw (7) can also be used as the emergency control. Screw (9) is used to air bleed the solenoid control system. To ensure self-bleeding of the valve it is recommended to install it in a vertical position with the solenoid facing downwards. Bleeding process is necessary for the proper functioning of the valve. The valve can be used alone or as a built-in, pilot operated pressure relief valve SR4P2-B2 (datasheet No. HC 5117), or as a control valve of a built-in indirectly controlled pilot operated pressure reducing valve SP4P2-B3 (datasheet No. HA 5123). The valve body and the adjustment screw are zinc coated.

Open the catalog to page 1

Ordering Code Proportional Directly Operated Pressure Relief Valve 3/4-16UNF High performance Pressure range up to 120 bar (1740 PSI) up to 210 bar (3046 PSI) up to 350 bar (5076 PSI) Type of solenoid coil Connector EN 175301-803-A with quenching diode Connector AMP Junior Timer with quenching diode Connector Deutsch DT04-2P with quenching diode Nominal solenoid supply voltage 12 V DC Other coils on demand see catalog HA8007. Technical Data Valve size Cartridge Cavity Maximum operating pressure at ports P Maximum operating pressure at ports T* Flow range Hydraulic fluid Fluid temperature...

Open the catalog to page 2

The proportional pressure relief valve is not mechanically protected and it does not perform the relief valve function. Type of the Solenoid Coil Note: Example of most frequent coil types. For complete range valve coils with technical informatik about voltage, enclosure type, terminal box please afer to coil data sheet HA 8007. Coil example Connector EN 175301-803-A with quenching diode Connector EN 175301-803-A with quenching diode Connector AMP Junior Timer with quenching diode Connector AMP Junior Timer with quenching diode Connector Deutsch DT04-2P with quenching diode Valve Dimensions...

Open the catalog to page 3

Dimensions in millimeters and (inches) Spare Parts Solenoid coil Nominal voltage coil Ordering number Dimensions, quantity Ordering number O-ring The packing foil is recyclable. The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should not be construed in any case as a guaranteed representation of the product properties in the sense of the law. ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí tel.: +420-499-403 111 e-mail: info.cz@argo-hytos.com www.argo-hytos.com 4 Subject to alteration without notice !

Open the catalog to page 4