Directional Control Valve Solenoid Operated Size 06 · pmax 250 bar (3626 PSI ) · Qmax 50 L/min (13.2 GPM) 4/3 - and 4/2- way directional control valve Solenoid with removable coils - electrical connector can be rotated in direction by 90° Push button manual override Installation dimensions to DIN 24 340 / ISO 4401 / CETOP RP121-H Functional Description The RPEL1directional control valves consist of housing (1), a control spool (5) with two centering springs (4) and cylindrical operating solenoids (2, 3). The three-position directional control valves are fitted with two solenoids and two springs. Two-position directional control valves have either one solenoid and one return spring. The operating solenoids are DC solenoids. The connectors (6, 7) can be turned by 90°. By loosening the nut (8), solenoids can be turned around the actuator axis. In the case of solenoid malfunction or power failure, the spool of the valve can be shifted by manual override (9), provided the pressure in T-port does not exceed 25 bar. The basic surface treatment of the valve housing (1) is phosphate coated and the solenoids (2, 3) are zinc coated.

Directional Control Valve Solenoid Operated Manual overide standard covered with rubber boot no designation Nominal size Number of operating positions two positions three positions Spool symbols see the table Spool symbols Rated supply voltage of solenoids (at the coil terminals) 12 V DC / 2.41 A 24 V DC / 1.16 A Other voltage on request. Type of the solenoid coil with the connector to EN 1745301-803-A with the integrated quenching diode and the connector to EN 1745301-803-A with the connector AMP-Junior-Timer 2 PIN with integrated quenching diode and the connector AMP-Junior-Timer 2 PIN with...

Spool Symbols Designation Symbol Operating limits for maximum hydraulic power transferred by the directional valve. Pressure drop Ap related to flow rate

Type of the Solenoid Coil Designation Dimensions in millimeters (inches) Dimensional sketch Description Solenoid coil with the connector to EN 1745301-803-A Type of protection to EN 60 529 - IP 65 37 (1.457) Solenoid coil with the connector AMP- Junior-Timer 2 PIN Type of protection to EN 60 529 - IP 67 37 (1.457) Solenoid coil with the integrated quenching diode (bipolar transil diode) and the connector AMP- Junior-Timer 2 PIN Type of protection to EN 60 529 - IP 67 Solenoid coil with the connector Deutsch DT04-2P Type of protection to EN 60 529 IP 67 / IP 69K Solenoid coil with the integrated...

Valve Dimensions Valve with two solenoids Dimensions in millimeters (inches) Valve with one solenoid "a" Spool symbols R11, Z51, C51, H51, Y51 Solenoid a Solenoid b Manual override Name plate Square ring (4 pcs.) 9.25 x 1.68 supplied with valve 4 mounting holes Electrical connector, EN 1745301-803-A Space required to remove connector Retaining nut of the solenoid [Tightening torque 3+1 Nm (2.2+0.7 lbf.ft)] Valve with one solenoid "b" Spool symbols Z11, X11, C11, H11, Y11 Required surface finish of interface

Spare Parts 1 Solenoid coil 2 Nut with seal 3 Kit M2 4 Seal kit 5 Mounting bolts 6 Electrical connector 1. Solenoid coil Solenoid type For selection of solenoid coil and terminal box type use catalogue HA 8007. Coil type E2 E3 E4 E12 E13 E1 Ordering number 01200 27316600 27631400 27330200 27631600 02400 27316700 27632400 27449700 27633400 2. Solenoid retaining nut with seal Type of the nut Seal ring Standard nut 18 x 1,5 3. Kit M2 Rubber boot with pin 4. Seal kit Type Dimensions, number Standard - NBR70 9,25 x 1,68 (4 pcs.) 17 x 1,8 (2 pcs.) 5. Mounting bolts Dimensions, number Tightening torque...