Coils for Solenoid Operated Valves Various designs regarding sizes and types □ Large selection of AC / DC voltages Ordering Code Electromagnet coil Coil design (Size - according to the inner diameter) Coil housing design version Long drawn housing C Type of solenoid coil Conductor design * For loose conductors only Rated voltage of solenoid Special design Insulation design Surface treatment Detent type* Without detent With detent See the table of preferred coils according to customer's ruquirements * For loose conductors only

Type of solenoid coil * Coil versions 106 are suitable for the rectified voltage of 120V / 60Hz. ** Coil version 205 are suitable for the rectified voltage of 230V /50Hz. Notes: Only specified combinations are available in the table of preferred types. Other designs available at request. Valve type

Valve typel Type of solenoid coil

Valve type Type of solenoid coil E8

Valve type Type of solenoid coil Type of solenoid coil Type of solenoid coil ** Coil version 205 are suitable for the rectified voltage of 230V /50Hz. Notes: Only specified combinations are available in the table of preferred types. Other designs available at request. * Coil versions 106 are suitable for the rectified voltage of 120V / 60Hz. Valve type

Type of solenoid coil ** Coil version 205 are suitable for the rectified voltage of 230V /50Hz. Notes: Only specified combinations are available in the table of preferred types. Other designs available at request. * Coil versions 106 are suitable for the rectified voltage of 120V / 60Hz. Valve type

Type of solenoid coil ** Coil version 205 are suitable for the rectified voltage of 230V /50Hz. Notes: Only specified combinations are available in the table of preferred types. Other designs available at request. * Coil versions 106 are suitable for the rectified voltage of 120V / 60Hz. Valve type

Type of solenoid coil ** Coil version 205 are suitable for the rectified voltage of 230V /50Hz. *** Input signal level for 12V-electronics. Notes: Only specified combinations are available in the table of preferred types. Other designs available at request. * Coil versions 106 are suitable for the rectified voltage of 120V / 60Hz. Valve type

** Coil version 205 are suitable for the rectified voltage of 230V /50Hz. Type of solenoid coil Notes: Only specified combinations are available in the table of preferred types. Other designs available at request. * Coil versions 106 are suitable for the rectified voltage of 120V / 60Hz. Valve type

Rectifier Connection in the Coil with "E5" Connector In-built bridge rectifier for the maximum output voltage 253 Veff Voltage frequency 50 – 60 Hz. Varistor for 275 Veff Dimensions in millimeters (inches) Design version - B Connector design Connector design E3A (Connector AMP-Junior-Timer - (2-pins; male ) E4A (E3A with quenching diode)

Dimensions in millimeters (inches) Connector design E1 (Connector EN 175301-803-A) E2 (E1 with quenching diode) Connector design E3 (Connector AMP-Junior-Timer - (2-pins; male ) E4 (E3 with quenching diode) E3A (Connector AMP-Junior-Timer - (2-pins; male ) E4A (E3A with quenching diode) Connector design

Dimensions in millimeters (inches) Connector design E5 (Connector EN 175301-803-A with integrated rectifier) Connector design Connector design E8 (Loose conductors (two insulated cables)) E9 (E8 with quenching diode ) E13 (E12 with quenching diode) 49,4(1.945) Note: A = Standard 300 mm, other sizes on demand

Dimensions in millimeters (inches) Design version - D Connector design EW5 - (Wirebox) Dimensions in millimeters (inches) Connector design E1 (E1 = Connector EN 175301-803-A) E2 (E2 = E1 with quenching diode)

Dimensions in millimeters (inches) Design version - B Connector design E3A (Axial connector AMP Junior Timer (2 pins; male)) E4A (E3A with quenching diode) Connector design E5 (Connector EN 175301-803-A with integrated rectifier)

Dimensions in millimeters (inches) Connector design Connector design E8 ( Loose conductors (two insulated cables)) E9 (E8 with quenching diode) E13 (E12 with quenching diode) Note: A = Standard 300 mm, other sizes on demand Design version - C Connector design EW1 - (wirebox) EW2 - (E3 with quenching diode)

Dimensions in millimeters (inches) Design version - A Connector design Connector design E3 (Connector AMP-Junior-Timer - (2-pins; male ) E4 ( E3 with quenching diode) E1 (Connector EN 175301-803-A) E2 (E1 with quenching diode) 73,2(2.882) Detent of the coil to the valves body Detent of the coil to the valves body Connector design Connector design E5 (Connector EN 175301-803-A with integrated rectifier) E8 (Loose conductors (two insulated cables)) E9 (E8 with quenching diode) 72(2.834) 73,2(2.882) Detent of the coil to the valves body 72(2.834) 73,2(2.882) Detent of the coil to the valves body...

Dimensions in millimeters (inches) Design version - A Connector design 72(2.834) 73,2(2.882) Detent of the coil to the valves body Identification and Survey of the Offered Connectors Connector Connector description Connector E1 with quenching diode Connector AMP Junior Timer (2 pins; male) Connector E3 with quenching diode Axial connector AMP Junior Timer (2 pins; male) Connector E3A with quenching diode Connector EN 175301-803-A with integrated rectifier Connector EN 175301-803-A with integrated recrifier and fast deconnection Connector Kostal Connector E6 with quenching diode Loose conductors...

Survey of Available Connectors and Coils Connector C14B For all leaded wires (E8 a E9) or with a combination with connector (E10; E11; E16; E17; E18; E19; E20; E21; E23; E24 and E25) can be protected with braiding (B), see ordering code. Caution! The packaging foil can be recycled. All stated data serve for the product description only and in no case should be understood as features guaranted in terms of law. ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí tel.: +420-499-403 111 e-mail: [email protected] www.argo-hytos.com 18 Changes reserved!