Catalogue Fluid Management
69Pages

Products with these icons are specially made for: Industrial Applications Mobile Applications

Fluid Management

Product range Suction filters Clogging indicators Ventilating filters Return filters Pressure filters Return-suction filters High pressure filters Return-suction filters Description ARGO-HYTOS produces sophis­ icated filter solutions together t with hydraulic and lubrication systems. The range of solutions we have implemented extends from fixed-position industrial plants to mobile applications. As well as customized developments, exactly adjusted to the individual requirements of the customer, ARGO-HYTOS offers a com­ rehensive range of innovative standard solutions for a wide p variety of...

Product range Fluid and Motion Control Customized solutions Gear pumps www.argo-hytos.com Subject to change · 0215 Control solutions

Product range Fluid and Motion Control Directional and proportional valves Modular valves Sandwich valves Screw-in cartridge valves Slip-in cartridge valves Load motion cartridges Explosion proof valves Hydraulic power packs Description ARGO-HYTOS’ expertise in control technology is the fruit of more than 65 years‘ experience. We focus here on a wide range of valves,­power units and integrated manifolds featuring all commonly used design features and functions, together with proportional valves and the associated control electronics: ›› Directly operated directional valves in CETOP 02 to...

Product range Fluid Management Off-line filter Off-line filter Off-line filter unit Off-line filter unit Dewatering system Dewatering system Description As well as reducing maintenance and servicing costs, effective fluid management is also a key factor in boosting the reliability,­ productivity and cost-effectiveness of the operation. ARGO-HYTOS supplies application-oriented products for manual and automatic cleaning of hydraulic fluids: ›› Off-line filters ›› Off-line filter units ›› Filter cooling systems ›› Oil service units ›› Dewatering systems

Product range Portable particle counter Portable particle monitor Particle monitor Wear sensor Condition sensors Pressure sensor Remote interfaces / display units Valve electronics Description Systems that provide reliable assessment of the condition­of hydraulic fluids are the key feature of continuous fluid ­ monitoring. Sensors and measurement technology from ARGO-HYTOS p ­ recisely target this range of tasks. Our fluid monitoring p ­ roducts comprise equipment and system solutions to enable online monitoring during continuous operation as well as ­ analysis of bottled samples under...

Off-line Filters FN 060 · FN 300 In-line mounting · Operating pressure up to 12 bar / 174 psi · Nominal flow rate up to 650 l/min / 172 gpm Description Application Return-flow filter or off-line filter in hydraulic and lubrication systems. Performance features Protection against wear: The EXAPOR®MAX 2 Ultra-Fine element meets the highest cleanliness standards, even at full flow. Protection against failure: The off-line filter includes a feature that guarantees a closed by-pass valve even at ν ≤ 200 mm2/s / 930 SUS (cold start condition) within specified operating parameters. Special design...

Filter head: Aluminium alloy Filter housing: Steel (FN 060) Aluminium alloy (FN 300) Cover: Aluminium alloy Seals: NBR (FPM on request) Filter media: EXAPOR®MAX 2 - inorganic, multi-layer microfibre web Water-absorbing filter elements EXAPOR®AQUA are available on request. For FN 060 there is a bleeder screw, and with Part No. FNS 060.1720 a fastening kit available on request. Electrical and / or optical clogging indicators are available on request – with either one or two switching points resp. temperature suppression. Dimensions and technical data of the clogging indicators see catalogue...

Diagrams ∆p-curves for complete filters in Selection Chart, column 3 D1 Pressure drop 2as a function of the flow volume at ν = 35 mm /s / 162 SUS (0 = casing empty) 1,0 Pressure drop as a function of the kinematic viscosity at nominal flow D2 Pressure drop 2as a function of the flow volume at ν = 35 mm /s / 162 SUS (0 = casing empty) Pressure drop as a function of the kinematic viscosity at nominal flow Filter fineness curves in Selection Chart, column 4 The abbreviations represent the following β-values resp. finenesses: Dx Filtration ratio β as a function of particle size x obtained by...

Selection Chart * with automatic ventilation valve Optical or electrical indicators are available to monitor the clogging condition of the element. For the appropriate clogging indicators see catalogue sheet 60.30. Remarks: ›› The response / switching pressure of the clogging indicator must be lower than the cracking pressure of the by-pass valve (see Selection Chart, column 7). ›› Clogging indicators are optionally available and will be supplied separately, if ordered. ›› The filter units listed in this chart are standard units. If modifications are required, e.g. with water-absorbing...

Minimum distance for filter maintenance Fastening screw thread 4 x M8 - 18 mm deep SAE-flanges consider size H Minimum distance for filter maintenance Fastening kit on request ARGO-HYTOS Part No. FNS 060.1720 Fastening screw thread optional Pressure holes plugged with screws M4 Ventilation valve Measurements in inch Type www.argo-hytos.com Subject to change · 80.10-EN/US · 0716

Quality Assurance Quality management according to DIN EN ISO 9001 To ensure constant quality in production and operation, ARGO-HYTOS filter elements undergo strict controls and tests according to the following ISO standards: ISO 2941 ISO 2942 ISO 2943 ISO 3968 ISO 16889 ISO 23181 Verification of collapse/burst pressure rating Verification of fabrication integrity (Bubble Point Test) Verification of material compatibility with fluids Evaluation of pressure drop versus flow characteristics Multi-Pass-Test (evaluation of filter fineness and dirt-holding capacity) Determination of resistance to...