C4.0410 · C4.0412 · C4.0421 · C4.0431 · C4.0450 · C4.0464 With mounting bolts · Bolt thread M10 · Dipstick length up to 640 mm / 25.2 inch Description Application Controlling the oil level in hydraulic oil or lubricant reservoirs. Construction and function ARGO-HYTOS oil level dipsticks are robust semicircular metal rods with an O-ring seal. A mounting bolt with a suitable hole is supplied with each dipstick. Dipsticks are available in various lengths, with various markings, and with various mounting bolts (see selection chart). Special features › The robust material withstands even the most severe operating conditions. › Absolutely leak-free due to the integrated O-ring. › The supplied dipstick mounting bolt can also replace one of the mounting bolts of an in-tank, return or suction filter. Mounting The bolt supplied with the oil level dipstick is installed either in a separate threaded hole or in an already existing mounting hole for an in-tank filter. If used as a filter mounting bolt, a separate threaded hole is eliminated. Care should be taken to provide a proper seal between the tank, the filter and the mounting bolt. www.argo-hytos.com Subject to change · 70.10-EN/US · 08
Open the catalog to page 1Preferred type, no minimum order quantity required Remarks: The dipsticks listed in the chart are standard dipsticks. If modifications are required, e.g. for the use in pressurized tanks, we kindly ask for your request. www.argo-hytos.com Subject to change ■ 70.10-EN/US ■ 0818
Open the catalog to page 2Dipstick with bolt Measurements in mm Mounting bolt
Open the catalog to page 3(not suitable for use in pressurized hydraulic oil tanks) -22 °F ... +212 °F (temporary +257 °F) Ambient temperature range -30 °C ...+ 80 °C (temporary +100 °C) -22 °F ... +176 °F (temporary +212 °F) Materials Dipsticks: Steel, zinc plated Bolts: Steel, zinc plated Connection Threaded ports according to ISO 228 or DIN 13 Sizes see section Dimensions (other port threads on request). Hydraulic fluids Mineral oil and biodegradable fluids (HEES and HETG, see info-sheet 00.20). Mounting position Preferably in vertical position Illustrations may sometimes differ from the original. ARGO-HYTOS is not...
Open the catalog to page 410 Pages
3 Pages
6 Pages
6 Pages
65 Pages
342 Pages
69 Pages
50 Pages
20 Pages
2 Pages
4 Pages
4 Pages
6 Pages
8 Pages
6 Pages
4 Pages
4 Pages
10 Pages
4 Pages
20 Pages
20 Pages
10 Pages
20 Pages
10 Pages
18 Pages
6 Pages
4 Pages
4 Pages
6 Pages
3 Pages
21 Pages
2 Pages
32 Pages
24 Pages
16 Pages
2 Pages
16 Pages