ROUTE
6Pages

CENTRIFUGAL PUMPS FOR HANDLING CORROSIVE LIQUIDS MAG-DRIVEN OR MECH-SEALED PP • E-CTFE 50 Hz - 60Hz ITALY

This series of thermoplastic pumps is available in both magnetic drive setting and mechanical seal for pumping various chemical liquids even if laden with impurities and suspended solids. Mainly by the quantity and quality of these, you can choose the setting that better suits you. A patented system for dry running without damage is available for the magnetic drive “R” version. ROUTE TMR Magnetic-driven close-coupled pumps ROUTE ZMR Mechanical sealed close-coupled pumps (1) EPDM and (2) FFKM on request - (*) Compliant to ATEX 94/9/EC Note: Maximum inlet pressure: 1,5 bar - (*) Compliant to...

The mag-driven system excludes any type of rotating seal. The sealing is guaranteed thanks to an O-ring static gasket placed in the connection between the volute casing and the rear casing. It is possible to couple standard motors without disassembling the pump. m Internal mechanical seal Centrifugal impeller (open type)

TECHNICAL DATA NOTES: All curves are referred to: water at 20°C - viscosity 1 °E - specific gravity 1 kg/dm3

VARIOUS CONFIGURATIONS Flanged version with armour Threaded version with armour ARMOUR A stainless steel armour was designed to fit all models to protect the front casing from accidental mechanical shocks of various nature (e.g.: starts up with vacuum in inlet piping with possible tubing excursions due to elastic brackets or thermal elongation). The guard plate is optional for the G3 size of pumps. BASEPLATE The base for anchorage of the pump is in stainless steel with ground terminals in chemical-resistant thermoplastic materials. It is supplied upon request. “BSP” outlet cylindrical...

ARGAL srl Via Labirinto, 159 - 25125 BRESCIA - (Italy) Phone +39 030 3507011 - fax +39 030 3507077 info@argal.it - www.argalpumps.com