KGS-SATURNsump-50Hz-Argal

Product catalog summary

Overview: The document provides detailed information about SATURNSUMP vertical sump pumps, which are entirely made of fiberglass and designed for handling seawater and corrosive fluids. These pumps are noted for their high chemical resistance and mechanical strength, making them suitable for various industrial applications.

Specifications: The pumps are constructed from fiberglass with a V1G resin for general use, offering resistance to a wide range of chemicals and corrosive agents. They can operate in ambient temperatures from -35°C to 40°C and withstand working temperatures up to 100°C. The submersible column length ranges from 0.5 m to 5 m, with custom lengths available upon request.

Applications: SATURNSUMP pumps are suitable for sectors such as aquariums, chemical processing, wastewater treatment, desalination, and more. They are particularly effective in environments involving acids, chemical waste, and seawater.

Technical Features: The pumps feature a centrifugal, vertical design with a self-supporting pump shaft. They include a fiberglass baseplate, column, delivery pipe, and impeller with carbon fiber blades. The shaft guide bushings require constant wetting with the pumped liquid or an external flush.

Configurations: The pumps are available in five resin formulations (V1G, V1A, V1C, V1F, V1X) to cater to different corrosive environments, including ATEX zones. Additional features include vapour seals, flushing options, and strainers to block large solids.

Performance Data: The document includes performance curves illustrating the pump's capacity and head at various motor speeds (1450 rpm, 970 rpm, 2900 rpm) and configurations.

Contact Information: For further inquiries, Argal srl can be contacted via phone, fax, or their website.

Catalog excerpts

SATURNSUMP VERTICAL SUMP PUMPS ENTIRELY MADE OF FIBERGLASS FOR SEAWATER AND CORROSIVE FLUIDS EUROPEAN FIRST 50 Hz

Open the catalog to page 1

Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction, made of Fiberglass, offers a very high resistance, great robustness and a large range of ambient temperatures from -35°c to 40°c -, and working temperatures up to 100°C without damaging the mechanical strength of the casing. The length of the submersible column varies from 0,5 m to 5 m (more length available on request). CHEMICAL RESISTANCE AND MECHANICAL STRENGTH Argal offers various formulations...

Open the catalog to page 2

KGS pumps are centrifugal, vertical, with driven self-supporting pump shaft, single-stage with the volute casing and column directly submerged in the liquid to be pumped, coupled to a non-synchronous electric motor via a flexible coupling, with hydraulic connections to the axial inlet facing the bottom of the pump and radial outlet connected to a vertical piping system. The vertical piping ends with hydraulic connections to the system turned upwards on the base plate. The shaft guide bushings must be constantly kept wet with the liquid being pumped or with a clean liquid external flushed. FIBERGLASS...

Open the catalog to page 3

CONSTRUCTION & CURVES

Open the catalog to page 4

5 VERSIONS OF CONSTRUCTION V1G: for the major part of corrosive agents containing acids, alkalies, detergents, sea water, brine, etc. VIA: for liquids with a low concentration of abrasion: fossil shell flour, ashes, titanium dioxide. V1C: Perfect for resisting to bleach corrosive liquids such as sodium hypochlorite (NaOCI) or hydroxide peroxide (H2O2); V1F: a specific solution made up with a synthetic veil to ensure resistance to fluoride acid (HF) and other liquids with fluorine. V1X: a specific solution to operate into ATEX areas with conductive resin liner. VAPOUR SEALS SATURNSUMP KGS are...

Open the catalog to page 5