CENTRIFUGAL VERTICAL SUMP PUMPS IMMERSED OR EXTERNAL INSTALLATION PP • PVDF 50 Hz ITALY

VERTICAL SUMP PUMPS MADE OF PP • PVDF These centrifugal sump pumps are made of thermoplastic polymers, they are close-coupled with the axial hydraulic connection directed downward. They were specifically designed for pumping corrosive liquids and with a particular construction to guarantee a longer life time and higher efficiency. No metal part is in contact with the liquid pumped and no liquid leakage is verified thanks to use of a device of vapour sealing in static and dynamic conditions. EQUIPRO pumps are available in two versions: KME and HME. AN INNOVATIVE CONCEPT The innovative design of...

Standardised electric motors (IEC, NEMA). No motor with special shafts and flanges. Possibility to set different voltages and protections. Explosion-proof classes (E-exd) are applicable too. Rigid coupling flange with orthogonal form was designed by Argal ensures an automatic centering of the 2 half-couplings easy opening /closing of the parts Baseplate as well conceived by Argal for simultaneously fixing the flange connected to the motor with the immersed body composed of 2 separable parts to allow the easy installation of the motor through the coupling and to be used as a base for applications...

TECHNICAL DATA KME • HME MATERIALS WR Pump casing Centrifugal impeller STAINLESS STEEL Shaft coating Immersed screws STAINLESS STEEL TEMPERATURES MAXIMUM WORKING TEMPERATURE °C 275 Motor size 3 phases (for all models) - 1 phase (<3 kW)

APPLICATIONS Wastewater treatment Surface treatment Scrubber (cleaning fumes) Heat exchanger Cleaning fumes

ARGAL srl Via Labirinto, 159 - 25125 BRESCIA - (Italy) Phone +39 030 3507011 - fax +39 030 3507077 [email protected] - www.argalpumps.com