TECHNICAL DATA SHEET GREEN SEALANT SEALANT FOR PLAN SURFACES - PRODUCT DESCRIPTION - CURE SPEED Product suitable for coupling quite precise surfaces, with max. clearance 0.30 mm. Specific for sealing complex shaped pieces in cast components. Recommended for hydraulic and pneumatic control valves, hydraulic power units, flanges in general. Self-modelling product that creates seals of any shape. It replaces traditional seals on rigid joints. It has low mechanical strength, which facilitates the disassembly, and high thixotropy, which reduces the product migration during the application. It ensures the metal to metal contact over time, because there are no settling phenomena, which occurs instead in the conventional seals. It has high strength and seal against water, oils, fuels, hydraulic and refrigerating fluids, gas and vapours and chemical agents in general. - DIRECTIONS FOR USE All surfaces must be clean and dry. System MC217 is recommended. Apply product to the surfaces and assemble. Tighten bolts as required. Wait prescription time before handling - TECHNICAL CHARACTERISTICS • • • • • • • • • Green Colour 1,05 Specific weight 17.000-60.000 Viscosity at 25°C (mPa.s) 0,3 mm Max. clearance 4-6 Sliding resistance (N/mm2) 2-4 Tensile strength (N/mm2) 2 2-4 Shock resistance (kJ/m ) Over 100% Ultimate elongation Setting time 20 – 40 min. handling resistance 3 – 6 hrs. functional resistance 24 hrs. final resistance -55°C +150°C • Temperature resistance Product tested according to ASTM D1002, D2095. The data contained herein are the result of technological research by our laboratories and are given for informative purposes only. We exclude any liability deriving from the incorrect choice or application of the product and from the lack of the necessary precautions, which should be carefully checked by the user. For information, please contact our Technical Dept. on no. +39 02924361 AREXONS S.p.A. A SOCIO UNICO Via Antica di Cassano, 23 20063Cernusco sul Naviglio (MI) Italy Capitale Sociale: € 15.000.000,00 I.V. Registro delle Imprese di Milano n. 09728360968 Codice Fiscale e Partita IVA 09728360968 Direzione e coordinamento ex art. 2497 c.c. PLI (Netherlands) B.V. Centralino 02 92436.1 Fax 02 92436.306 www.arexons.com A wholly-owned subsidiary of PETRONAS Sistemi di gestione di qualità della società Arexons S.p.A. certificati ISO 9001 da LRQA. Sistemi di gestione di ambiente e sicurezza della società Arexons S.p.A. certificati ISO 14001 e

TECHNICAL DATA SHEET This product is not normally recommended for use on plastic surfaces, where stress cracking could result. Please contact our technical service to confirm compatibility. - STORAGE Product validity after packaging in sealed package and stored at room temperature: Minimum 18 months - PACKAGING - TEMPERATURE RESISTANCE plastic bottle - NOTES For information on product safety please consult the safety sheet. R&D 11.05.2015 rev.2 The data contained herein are the result of technological research by our laboratories and are given for informative purposes only. We exclude any liability...