The electrically controlled key switch is designed to ensure safe and efficient temporary isolation. Made with high-quality materials such as chrome-plated brass and Stainless Steel, ideal for use in nonaggressive, non-corrosive environments and for light-duty applications. Designed for rear panel installation. Switch disconnector Operation V180 is a key driven electrical switch interlock designed to use as a mechanical interlock to control machines isolation. The free key can be used to operate on other interlocks to operate The key is trapped when electrical contacts are closed in position “1” (standard cam-switch 4NO on a supply or to get access to a dangerous area. SKS is available in different voltages; switching loads and To take the key back an electrical remote signal by New Arel Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

Usage The V180 switch interlocks should be used as part of an integrated safety system. No hazardous substances were used in the manufacture of this interlock product. » V180 switch interlock should be mounted to a panel using suitable fasteners. » It can be easily mounted front or back side of a panel. » You must use M5 supplied Stainless Steel screws (anti-temper fasteners are highly recommended). » V180 interlocks and all AREL®’s interlocks must be installed by competent and qualified person who as read understood these instructions. Periodic visual check should carried-out by site manager....

Access control to uninterruptible power supplies (UPS) A typical application for controlling access to uninterruptible power supplies (UPS) is the use of a solenoid-controlled key switch. When the machinery is in a safe state to allow access; the UPS system sends a signal to the lock to energize the solenoid, thus Isolation allowing the rotation and extraction of the key. Interrupting the UPS power supply. The key can then be taken to access the protected area. The UPS can not start until the key is removed and taken to the key switch. Switch disconnector Protection of machinery with one or more...

New Arel Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

* 1 pole = 38mm 2 pole = 44mm 3 pole = 50mm New Arel Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

it\REL LIGHT DUTY SKS1AB2CPX UNIT OF MEASURE: mm CONVERSION: 1 mm = 0.03937 inches New Arel Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

Component type With a single contact switch (2NO) With a two contact switch (4NO) With a three contact switch (4NO) Stainless Steel Flip Cap Customised laser marking Anti Tamper Screws Natural anti-grip graphite for locks NEW AREL Srl Unipersonale Via Giuseppe di Vittorio, 70 20026 Novate Milanese - Milan (Italy) New Arel Srl cannot be held responsible for eventual malfunctioning of tampered products. www.newarel.com IT08197180964 Please contact our offices in case of unsolvable problems according to the maintenance conditions.