a’AREL HEAVY DUTY DPKDoor lock The access door lock is designed to provide secure and versatile solutions for swing doors. It consists of a lock body and a latch mounted on the door jamb, ensuring reliable operation. Made from a combination of nickel-plated brass, aluminum, and Stainless Steel, it offers exceptional durability and resistance. Ideal for use in standard, corrosive, and heavy-duty environments, this lock is supplied for back panel mounting and provides a robust bolt cutting force of 10KN, making it a dependable choice for demanding applications. H65 door locks are Heavy Duty robust key access interlocks. Typical industries using them are: • Power Generation and Distribution; The free key can be used to operate on other interlocks on a supply. Operation The DPK AREL® access interlocks are used to control access to hazardous and dangerous areas. Access Control The opening key is trapped to open the door. The key stays locked while the door is open. AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

>.HREL HEAVY DUTY Technical Data Access Control Usage DP1K must be used on partial body access doors (visible operator) where the possibility of accidental lock in is not present, and the use of a personal safety key is not needed. These locks have been designed to be back panel installed on hinged and swing doors. Front panel installation requires a spacer plate. H65 access interlocks should be used as part of an integrated safety system. No hazardous substances were used in the manufacture of this interlock product. » The housing of the DP1K is normally mounted back panel on the hinged door...

Machine Guarding Machinery protection with partial access to the risk zone (visible operator) A typical application of the single key access interface is the protection of machinery with partial access to the risk zone; this means that the operator keep visible. the machine when the key is removed. The key can then be inserted into the single-key door lock to enable access to the machine. The machine can not be restarted until the door is completely closed and locked by the lock; only in this way will it be Access Control The system has a key switch that cuts the safety circuit of possible to...

Block the access door to a dangerous area with light signaling when using electric or pneumatic machines The bolt locks with safety switches are used as part of a safety system, typically in electrical cabinet applications. The power Door lock supply to the machine is switched on and the protective door of the hazardous area is blocked. The key is trapped in the interlock. Before entering the machine area, the isolator lever must be turned to isolate the machine. To lock the isolator lever in the safety position, it is necessary to rotate the key in the interlock by extending the bolt. The removal...

Drawing UNIT OF MEASURE: mm CONVERSION: 1mm = 0,03937’’ Access Control AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

Component type - Door lock Heavy Duty Shaft in Stainless Steel Access Control Left hinged doors Right hinged doors Stainless Steel Flip Cap Customised laser marking Anti Tamper Screws Natural anti-grip graphite for locks NEW AREL® Srl Unipersonale Via Giuseppe di Vittorio, 70 20026 Novate Milanese - Milan (Italy) AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. www.newarel.com IT08197180964 Please contact our offices in case of unsolvable problems according to the maintenance conditions.