DBBolt lock The product features a key mechanical interlock, specifically designed to control the rotation or movements of operational equipment. It has a diameter of 15.92mm (16-), with the bolt available in various lengths to suit different requirements. Made from nickeled brass, the material ensures durability and reliability. This makes it ideal for use in corrosive, non-corrosive, or aggressive environments. Additionally, the bolt offers a cutting force of 19KN, guaranteeing robust performance under demanding conditions. H55 are Heavy Duty robust key mechanical interlocks designed for the control of rotation and movements of operations equipment. Typical industries using the H55 range of interlocks are: • Power Generation and Distribution; The free key can be used to operate on other interlocks to get the access on a dangerous area. Key is free, bolt is extended. Key is trapped while the bolt is retracted. The DB11 AREL® bolt interlocks are used to control handles or toggles switchgear and breakers. The bolt stroke is 19,5mm (0,77’’). DB11-V0125 AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

>.HREL HEAVY DUTY Technical Data Usage DB11 bolt, when extended, blocks the rotation or movement of operations equipment. This lock has been designed to be easily installed on panels; on operations equipment by additional metal plates. H55 bolt interlocks should be used as part of an integrated safety system. No hazardous substances were used in the manufacture of this interlock product. » The housing of the DB11 is normally mounted to a panel using suitable fasteners. Where a panel is not present, customized metal plates are needed to adapt the lock on the operations equipment surfaces. » You...

>.HREL HEAVY DUTY • Security systems for safe control of switches or valves that prevent access to dangerous areas These are security systems that use mechanical key interlocks. While power to the system is activated, the access doors to the hazardous area remain locked. The key A remains locked in the lock (1) while the process is actived and the line is powered. To access the hazardous area, the disconnector is moved to the OFF position and the bolt A is advanced, locking the disconnector in the open position (OFF). Key A is then picked up and taken to the grounding switch. By inserting and...

DBC11 UNIT OF MEASURE: mm CONVERSION: 1 mm = 0.03937 inches MB11 UNIT OF MEASURE: mm CONVERSION: 1 mm = 0.03937 inches AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

>.HREL HEAVY DUTY UNIT OF MEASURE: mm CONVERSION: 1 mm = 0.03937 inches DB11XCL UNIT OF MEASURE: mm CONVERSION: 1 mm = 0.03937 inches a AREL DB11-V0125 AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

>.HREL HEAVY DUTY Order informations A Component type B DB11-V0125 AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

Stainless Steel Flip Cap Customised laser marking Anti Tamper Screws Natural anti-grip graphite for locks NEW AREL® Srl Unipersonale Via Giuseppe di Vittorio, 70 20026 Novate Milanese - Milan (Italy) AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. www.newarel.com IT08197180964 Please contact our offices in case of unsolvable problems according to the maintenance conditions.