The product features an electric key switch designed for machine circuit control and short-term insulation. Made from durable nickeled brass, it resists corrosion and wear, making it suitable for non-aggressive, corrosive, and heavy-duty environments. It can be mounted on a panel or back panel and is available with various switching loads and contact configurations to meet diverse operational needs. Powersafe electrical switch Operation H180 is a key driven electrical switch interlock designed to use as a mechanical interlock to control machines isolation. The free key can be used to operate on other interlocks to operate on a supply or to get access to a dangerous area. DC is available in different switching loads and contacts (24VDc/Ac  230VAc; 10A  32A; 2NO – 4NO – 6NO – NO/ NC – 2NO/2NC). The key is trapped when electrical contacts are closed (standard cam-switch 4NO type) AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

>.HREL HEAVY DUTY The H180 switch interlocks should be used as part of an integrated safety system. No hazardous substances were used in the manufacture of this interlock product. » H180 switch interlock should be mounted to a panel using suitable fasteners. » It can be easily mounted front or back side of a panel. » You must use M6 Stainless Steel screws (anti-temper fasteners are highly recommended) using threadlock set to a torque of 5N/M max. Technical Data » H180 interlocks and all AREL®’s interlocks must be in stalled by competent and qualified person who as read understood these instructions....

Machine Guarding Machinery protection with partial access to the risk zone (visible operator) A typical application of the single key access interface is the protection of machinery with partial access to the risk zone; this means that the operator keep visible. the machine when the key is removed. The key can then be inserted into the single-key door lock to enable access to the machine. The system has a key switch that cuts the safety circuit of The machine can not be restarted until the door is completely closed and locked by the lock; only in this way will it be possible to recover the key...

>.HREL HEAVY DUTY H180 UNIT OF MEASURE: mm CONVERSION: 1 mm = 0.03937 inches Depth depens on camswitch model (C - 2C - 3C...) TYPE NO ELECTICAL SCHEME TYPE NO/NC ELECTICAL SCHEME AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. Please contact our offices in case of unsolvable problems according to the maintenance conditions.

Switch amperage (For example: A20, A25, A32) Type NO/NC Component type Stainless Steel Flip Cap Customised laser marking Anti Tamper Screws Natural anti-grip graphite for locks NEW AREL® Srl Unipersonale Via Giuseppe di Vittorio, 70 20026 Novate Milanese - Milan (Italy) AREL® Srl cannot be held responsible for eventual malfunctioning of tampered products. www.newarel.com IT08197180964 Please contact our offices in case of unsolvable problems according to the maintenance conditions.