PROGRAMMABLE SIGNAL CONDITIONERS Features Universal power supply: 20 to 250 Vac and 20 to 250 Vdc Universal input: 100mV, 1V, 10V, 270V, 20mA, Pt100, Ni 100 (2, 3 or 4wire), APt100 thermocouple, resistance and potentiom. Typical response time: 300ms Supply for 2-wire sensor Isolated analog output(s) (A/2A) 0-4-20mA current (active/passive) or 0-10V voltage. Relay outputs (R): 2 or 4 change-over relays (8A/250 VAC on resistive load). Digital communications (N) isolated RS485 Modbus/Jbus Sensor break detection and selfdiagnosis. Isolation input / outputs / supply. Mode simulation allowing to validate the configuration or the installation. Programming either with microconsole or by the PC software SlimSET via a standard USB/^USB cable. Configu Easy programming on front face with a micro-console or with the PC software SlimSET (via a standard USB/pUSB cable). Programming with the Micro-console The graphical rear-lit LCD with tactile keyboard allows to visualise the following information: - the measured value with its unit, - the value of the analog output, - the product tag name, - the status of the relay outputs and the RS485 communications. • Scrolling message for programming help in various languages • Passcode protected programming Supply: 20 to 250 Vac and 20 to 250Vdc Power draw: 2.8 W max. 8 VA max. Dielectric withstanding: 3.0 kV-50Hz-1min. Operating temperature: -20 to +60°C Storage temperature: -20 to +70°C Installation: Pollution degree 2 / voltage surge II Protection: case / terminals: IP 20 Removable terminal blocks for screwed connections (2.5 mm2, flexible or rigid) Weight: 290g (with packaging) Self-extinguishing case of black UL 94VO PA66. Mounting in switchbox: latching on symmetrical DIN rail. Programming by PC : SlimSET Programming software (Windows environment) allowing: The storage of the configurations as files which can be consulted modified, duplicated or loaded into the converters. The edition and printing of files with or without having a signal conditioner connected. numbering of the terminals: A, B, C, D Voltage presence Led ON (green) Relay 1 Relay 2 Relay 3 Relay 4-^ ^console plug gUSB for programming via PC software c(Vl)us LISTED Process Control Equipment E482453 l_____ Outputs: A analog I/U isolated 2A analog I/U isolated R 2 change-over relays R4 4 change-over relays N RS 485 comms Available versions: (consult with us for different configurations) Order example: For s signal conditioner with universal input + 1 analog output + 2 relays: reference TPIv 10 AR • Standard programming cable USB type A male to pUSB type B male: reference C1-pUSB

ures Connectings Inputs Types of INPUTS Outputs of the TPIv 10 A/AR/2AR 0-4/20mA passive external source 30V max. 0-4/20mA passive external source 30V max. (1) Sensor break detection: mA input (if down scale > 3,5mA) Other inputs: a 12pA pulsed current allows the detection of line or sensor break. (2) Wiring possible in 2, 3 and 4 wire Influence of the line resistance (0<Rl<<25Q) included in the announced intrinsic error. (3) CJC efficiency: Internal CJC: ±2°C ±0.03°C/°C from -10°C to +50°C CJC (option terminal) : ±1°C from -10°C to +50°C MR Measure range Thermal drift <150ppm /°C The voltage...