TMv10-CAPv10-com-EN
2Pages

DIGITAL CONVERTER, PARAMETRABLE BY SWITCHES ARDETEM Universal power supply: 20 to 250 Vac and 20 to 250 Vdc Universal input: mA, mV, V, Pt100 3 or 4 wire, thermocouple J or K, resistance and potentiometer. Supply for 2-wire sensor • Isolated analog output: - active or passive current (0-20 mA or 4-20 mA) or voltage (0-10V). • Sensor break detection Self-zero and self-diagnosis • Configuration: A set of 8 switches located behind the front face allows selecting the input and output types and calibers without any other setting required. Dimensi Power supply: 20 to 250 Vac and 20 to 250 Vdc TMv10/CAPv10 Z: 24 Vdc ±30% Power consumption: 2.2 W max. 5 VA max. Dielectric withstanding: 3 kV eff. 50Hz-1min. (IN/OUT/supply) TMv10/CAPv10 HI: 5kV eff. 50Hz-1min. Operating temperature: -20 to +60°C Storage temperature: -20 to +70°C Installation: Pollution degree 2 / voltage surge II Protection: housing/terminals: IP 20 Removable terminal blocks for screwed connectings (2.5 mm2, flexible or rigid) Weight: 290g (with packaging) Self-extinguishing case of black UL 94VO PA66. Mounting in cabinet: latching on symmetrical DIN rail.

- Supply for 2-wire sensor: 24 Vdc ±15% (protection from short-circuits 30mA max) - Measurable overrange: ±10% of the caliber - Standard sampling time: 100ms (1ms if option F) - Common mode rejection rate: 130 dB Serial mode rejection rate: 70 dB 50/60Hz - Sensor break detection active for the inputs thermocouple, Pt100 and resistance < 440Q Coding Types: ARDETEM reference: TMv10 SFERE reference: CAPv10 Options: Z HI F version 24Vdc ±30% if electrical strength -5KV if option faster -response time Analog output Supply Max. supply current of the bus = 3.5A dc Input of the power supply 24Vdc...