INPUTS/OUTPUTS ACQUISITION SYSTEM The series µCs consists of measure converters for industrial signals (process, temperature, resistance, frequency…) which can either operate in an independent and autonomous way or be interconnected in a local network with interfaces of analog and relay outputs, or logic inputs Possibility to add on the communication bus a supervision and concentrator module with output Modbus, Ethernet, Profibus, Profinet and optionally with Datalogger. DIN rail footing for the distribution of the power supply and the communication signals. Power supply 24 V DC Galvanic isolation between input/output/supply: 2.5 kV Extra thin housing: 7.2 x 114 x 114 mm. Easy programming by µUSB plug on front face or quick configuration by µswitches for the versions S. ATEX area 2 Typical example of implementing: Analog outputs Sensors of pressure, temperature, flow, level, move … Output to PLC: Modbus / Ethernet / Profibus / Profinet. Relay outputs

Programmable converters: - µCs 12: Input mA, mV, V  1 analog output - µCs 212: Input mA, mV, V  2 analog outputs - µCs 11: Universal input  1 analog output - µCs 211: Universal input  2 analog outputs - µCs PT100: PT100 input  1 analog output - µCs 50: Frequency input  1 analog output - µCs 250: Frequency input  2 analog outputs - µCs 60: 2 frequency inputs  1 analog output - µCs 260 : 2 frequency inputs  2 analog outputs - µCs 61: 2 frequency inputs + integrator  1 analog output - µCs 261: 2 frequency inputs + integrator  2 analog outputs - µCs 70: TRMS voltage input  1 analog output...

Optional modules: Modules of analog outputs µCs 2A : 2 isolated analog outputs Modules of relay outputs µCs 4A : 4 isolated analog outputs Modules of logic inputs Modules of measure inputs µCs 2T : 2 logic inputs, non isolated µCs 4T : 4 logic inputs, isolated µCs 6T : 6 logic inputs, non isolated Concentrator supervisor: The µCv M is a 24 VDC power supply controller and a concentrator of measures for the converters or modules of the series µCs. It allows configuring and supervising the measures and the inputs/outputs of a local network consisting of µCs’s. The measures can be time-dated and...

Examples of applications: 1 –Sending of several measures on a PLC, in MODBUS (RS485) or Modbus TCP (Ethernet) T° inputs Furnace 1 Speed input  Local bus 2 – Sending of the measures from a site to a remote site : 4 relay outputs, images of the 4 logic inputs of the site A. 2 analog outputs, images of the 2 inputs 4/20 mA of the site A. 3 – Exchanges of inputs/outputs between 2 remote sites: 4 relay outputs, images of the 4 logic inputs of the site A. 2 outputs 4/20 mA, copies of the 2 inputs 4/20 mA of the site A. 4 relay outputs, copies o