Series TPls
4Pages

INPUTS/OUTPUTS ACQUISITION SYSTEM The series TPIs consists of measure converters for industrial signals (process, temperature, resistance, frequency…) which can either operate in an independent and autonomous way or be interconnected in a local network with interfaces of analog and relay outputs, or logic inputs. Possibility to add on the communication bus a supervision and concentrator module with output Modbus, Ethernet, Profibus, Profinet and optionally with Datalogger. DIN rail footing for the distribution of the power supply and the communication signals. Power supply 24 V DC Galvanic isolation between input/output/supply: 2.5 kV Extra thin housing: 7.2 x 114 x 114 mm. Easy programming by µUSB plug on front face or quick configuration by µswitches for the versions S. ATEX area 2 Typical example of implementing: Analog outputs Sensors of pressure, temperature, flow, level, move … Output to PLC: Modbus / Ethernet / Profibus / Profinet. Relay outputs

Programmable converters: - TPIs 12: Input mA, mV, V  1 analog output - TPIs 212: Input mA, mV, V  2 analog outputs - TPIs 11: Universal input  1 analog output - TPIs 211: Universal input  2 analog outputs - TPIs PT100: PT100 input  1 analog output - TPIs 50: Frequency input  1 analog output - TPIs 250: Frequency input  2 analog outputs - TPIs 60: 2 frequency inputs  1 analog output - TPIs 260: 2 frequency inputs  2 analog outputs - TPIs 61: 2 frequency inputs + integrator  1 analog output - TPIs 261: 2 frequency inputs + integrator  2 analog outputs - TPIs 70: TRMS voltage input...

Optional modules: Modules of analog outputs TPIs 2A: 2 isolated analog outputs Modules of relay outputs TPIs 4R: 4 relay outputs TPIs 4A: 4 isolated analog outputs Modules of logic inputs Modules of measure inputs TPIs 2T: 2 logic inputs, non isolated TPIs 4E11: 4 universal inputs TPIs 4T: 4 logic inputs, isolated TPIs 6T: 6 logic inputs, non isolated Concentrator supervisor: The TPIv M is a 24 VDC power supply controller and a concentrator of measures for the converters or modules of the series TPIs. It allows configuring and supervising the measures and the inputs/outputs of a local...

Examples of applications: 1 - Sending of several measures on a PLC, in MODBUS (RS485) or Modbus TCP (Ethernet) T° inputs Furnace 1 Speed input  Local bus 2 - Sending of the measures from a site to a remote site: 4 relay outputs, images of the 4 logic inputs of the site A. 2 analog outputs, images of the 2 inputs 4/20 mA of the site A. 3 - Exchanges of inputs/outputs between 2 remote sites: 4 relay outputs, images of the 4 logic inputs of the site A. 2 outputs 4/20 mA, copies of the 2 inputs 4/20 mA of the site A. TPIv MEER TPIv MEER 4 relay outputs, copies of the 4 logic inputs of th