single/3-phase balanced/unbalanced 3/4 wire networks quick and accurate true RMS measurement suitable for highly disturbed electrical networks Functions The transmitters EVAN3000 are especially designed for the measurement, the control and the transmission of all the parameters from AC electrical networks: voltage, current, power, energy, frequency, etc... Programming by the PC software SlimSET via a standard USB / pUSB cable or by tactile LCD micro console. Environment Operating temperature: -10°C to +55°C. Storage temperature: -25°C to +70°C. Marking C€ c© US LISTED Connection with footing to the local bus of the range of 7mm modules of inputs/outputs and converters TPIs and concentrators TPIvM • Universal, for all types of electrical networks. The following input calibers can be programmed: Current: 1 and 5 Aac (automatic caliber) Voltage (automatic caliber): - 60v L-N / 10Ov L-L - 250V L-N / 440v L-L • High-performance measure: continuous measurement without interruption, suitable for highly disturbed networks (phase angle etc.) • Quick cycle time: 20ms Available options ♦ 6 analog outputs ♦ 3 relay outputs ♦ Ethernet output (TCP Modbus) ♦ Harmonics analysis ♦ Logic input Connectings Logic L(rriA)-+ L(mA-l+ L(m^J+ L(m^J+ Function led (orange) Led voltage presence ~ --3^0 ON (green) Led relay ON (red) pconsole plug pUSB for programming via PC software Protection: case/terminals: IP 20 Removable terminal blocks for screwed connections (2.5 mm2, flexible or rigid) Self-extinguishing case of black UL 94VO PA66. Mounting in cabinet: latching on symmetrical DIN rail.

Technical features This converter can either operate in an autonomous way or be part of a local network made up of converters and modules of the series TPIs. Each converter or module is latched on DIN rail via a 5-points footing allowing the distribution of the communication and supply signals (24 Vdc supply). The modules allow to increase the number of analog or relay outputs. Up to 50 modules or converters can be connected on the same bus, up to 200 different measures can be made to transit, and analog measures can be taken up ( from engine winding T°, etc.). A supervision and concentrator...