Water painting booths - DOUBLE

Product catalog summary

Description: The water painting booth model 'DOUBLE' by Ardesia Srl is designed to efficiently remove pigments and fumes from spray painting processes. It utilizes a double veil of water, a rain system, and PVC droplet separators for this purpose. The air is further filtered using a 'paint stop' filter. The booth's structure is modular, constructed from press-folded galvanized steel panels, with maintenance facilitated by a gas spring mechanism for filter extraction.

Equipment: Key components include an antispark centrifugal electrical fan, double front sheet for water flow, rain system, PVC droplet separator, metal frames with 'Paint-stop' filter, wired electrical panel (IP55), wired ceiling light (IP66), stainless steel electrical immersion pump, water filter, emergency push-button, hour meter, and change section.

Technical Characteristics: The booth features a product density of 250 gr/m2, thickness of 50 mm, initial pressure drop of 30 Pa, and a maximum operating temperature of 120°C. It has an arresting gravimetric average of 87% and is classified as G3 under EN 779 standards. The flame resistance is rated F1 according to DIN 53438.

Filtration Systems: The synthetic filter is made from polyester fiber, offering high dust stopping capacity with low pressure drop. It is non-toxic and resistant to microorganisms and chemicals. The 'Paint Stop' filter, made from glass fibers and synthetic resins, is designed for high-temperature resistance and effective overspray collection.

Drop Separator: The H130 model is designed for vertical air flows and applications with crossed flows, made from pre-printed PVC sheets, providing optimal resistance to inorganic chemical agents.

Model Specifications: The booth is available in various sizes, with usable widths ranging from 2000 mm to 6000 mm, overall widths from 2450 mm to 6450 mm, and overall heights from 3180 mm to 3300 mm. Illumination is provided by 2 to 4 lights of 58 watts each. Exhaust fan power ranges from 1.5 kW to 6.0 kW, and pump power from 0.75 kW to 1.1 kW, with nominal air flow capacities from 8000 m3/h to 25000 m3/h.

Catalog excerpts

WATER PAINTING BOOTH MODEL: DOUBLE ACTIVE SOLUTIONS BETWEEN INDUSTRY AND AMBIENT ARDESIA SRL via Prato delle valli 58, 47892 – Aquaviva, Repubblica di San Marino Tel: +378.0549 999403 Fax: +39.0541 1811003 [email protected] www.ardesiasrl.net The content of this brochure is for illustration and advertising. Ardesia Srl reserves the right to make any necessary change to improve the products.

Open the catalog to page 1

9 DESCRIPTION: This water paint booth is suitable for removing the pigments and fumes released by various kinds of spray paint. Pigments and fumes are removed using a double veil of water, rain system and PVC droplet separators, whereas air is filtered by a “paint stop” filter. Its modular structure is made up of press-folded galvanized steel panels. Both sheets are made of galvanized and painted steel. It is possible to open the lower sheet with a gas spring to extract filters for maintenance. EQUIPMENT: 1. Antispark centrifugal electrical fan 2. Double front sheet for water flow 3. Lower sheet...

Open the catalog to page 2

MODEL: DOUBLE FILTRATION SYSTEMS METALLIC DRAWERS WITH “PAINT-STOP” FILTER The filter “Paint Stop” is built with long fibers of glass, finished with synthetic resins and distributed with gradual density in the direction of the air flow. It has good resistance to high temperature and strong capacity of accumulation of dust, it is especially suitable for the collection of surplus paint (over-spray). It is used in metal frames. TECHNICAL CHARACTERISTICS : Product density, gr/m2 . . . . . . . . . . . . . . . .. . . . . . 250 Thickness, mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Open the catalog to page 3

MODEL: DOUBLE

Open the catalog to page 4

Water painting booths - DOUBLE

Water painting booths - DOUBLE

Catalog excerpts

All ARDESIA catalogs and technical brochures