Dry painting booths - AMBER

Product catalog summary

Description: The Amber model dry painting booth is designed for the suction and removal of pigments and fumes from paint sprays using synthetic, organic, or water solvents. It features a suction wall with inertial cardboard and 'Paint-Stop' filter drawers for effective filtration. The booth is constructed with modular panels of galvanized iron sheets.

Equipment: The booth is equipped with an antispark centrifugal electrical fan, an energy-saving electric motor (IE2), frontal cardboard inertial filters, metallic drawers with 'Paint-Stop' filters, a wired electrical panel (IP 55), a wired ceiling light (IP 65), a change section, and an optional integrating air inlet filter.

Filtration Systems: The booth uses cardboard inertial filters and metallic drawers with 'Paint-Stop' filters. The inertial filters utilize the principle of inertial separation to capture paint particles, while the 'Paint-Stop' filters are made of glass fibers with synthetic resins, suitable for high temperatures and dust accumulation.

Technical Characteristics:

Cardboard Inertial Filters: Crossing speed of 0.3-0.75 m/sec, product density of 65 mm, thickness of 900 mm, initial pressure drop of 30 Pa, maximum operating temperature of 180°C, arresting gravimetric average of 90-98%, classified as G4, flame rating of 2 (U.L.2-697A).
Metallic Drawers with 'Paint-Stop' Filter: Product density of 250 gr/m2, thickness of 50 mm, initial pressure drop of 30 Pa, maximum operating temperature of 120°C, arresting gravimetric average of 87%, classified as G3, flame rating of F1 (DIN 53438).
Synthetic Filter: Product density of 100 gr/m2, thickness of 6-9 mm, initial pressure drop of 15 Pa, maximum operating temperature of 100°C, arresting gravimetric average of 80%, classified as G2, flame rating of F1 (DIN 53438).

Model Specifications: The Amber model is available in various sizes with different specifications:

AMBER-2: Usable width of 2000 mm, overall width of 2450 mm, overall height of 3180 mm, illumination of 2 x 58 W, exhaust fan power of 1.5 kW, nominal air flow of 8000 m3/h.
AMBER-3: Usable width of 3000 mm, overall width of 3450 mm, overall height of 3250 mm, illumination of 2 x 58 W, exhaust fan power of 2.2 kW, nominal air flow of 11000 m3/h.
AMBER-4: Usable width of 4000 mm, overall width of 4450 mm, overall height of 3300 mm, illumination of 2 x 58 W, exhaust fan power of 4.0 kW, nominal air flow of 15000 m3/h.
AMBER-5: Usable width of 5000 mm, overall width of 5450 mm, overall height of 3350 mm, illumination of 4 x 58 W, exhaust fan power of 5.5 kW, nominal air flow of 16500 m3/h.
AMBER-6: Usable width of 6000 mm, overall width of 6450 mm, overall height of 3250 mm, illumination of 4 x 58 W, exhaust fan power of 2.2+2.2 kW, nominal air flow of 22000 m3/h.

Catalog excerpts

DRY PAINTING BOOTH MODEL: AMBER ACTIVE SOLUTIONS BETWEEN INDUSTRY AND AMBIENT ARDESIA SRL via Prato delle valli 58, 47892 – Aquaviva, Repubblica di San Marino Tel: +378.0549 999403 Fax: +39.0541 1811003 [email protected] www.ardesiasrl.net The content of this brochure is for illustration and advertising. Ardesia Srl reserves the right to make any necessary change to improve the products.

Open the catalog to page 1

EQUIPMENT: 1. Antispark centrifugal electrical fan This type of painting booth is suitable for suctioning and 2. Energy-saving electric motor IE2 demolishing the pigments and fumes emitted from paint spray 3. Frontal cardboard inertial filters made with synthetic, organic or water solvents. The removal of 4. Metallic drawers with “Paint-Stop” filter the pigments and fumes occurs with a suctioning wall of inertial 5. Wired electrical panel IP 55 cardboard and a second filtration with “Paint-Stop” filters 6. Wired ceiling light IP 65 drawers. The paint booth is built with modular panels of press-...

Open the catalog to page 2

MODEL: AMBER FILTRATION SYSTEMS CARDBOARD INERTIAL FILTERS The cardboard filter uses the principle of inertial separation. The flow of air, filled with particles to be eliminated, undergoes many and continuous changes of direction. The particles of paint, heavier than the air, are deposited in the bags of the filter, that will saturate only when these bags are completely filled with paint. The inertial filters have self cleaning holes allowing the passage of large volumes of air with low pressure drop and to control the flow of air. TECHNICAL CHARACTERISTICS : Crossing speed, m/sec . . . . ....

Open the catalog to page 3

MODEL: AMBER

Open the catalog to page 4

Dry painting booths - AMBER

Dry painting booths - AMBER

Catalog excerpts

All ARDESIA catalogs and technical brochures