Arcotec GmbH Rotweg 24 | D-71297 Mönsheim Tel. +49 (0) 7044/9212-0 | Fax +49 (0) 7044/9212-12 www.arcotec.com | [email protected] Application: The Arcospot® PGS 061 device is used for the in-line pre-treatment of moulded parts, profiles, adhesion grooves and folded boxes. Treatment speeds exceeding 200m/min. can be achieved. The treatment clearance from the surface is approx. 6-10mm. Design: The device comprises the semi-conductor generator with an external transformer for a generation of high-voltage and the electrode head for the spark discharge (plasma). The connection between the transformer and the generator is of a plug-in design. The electrode head is connected to the transformer by a hose which comprises the high-voltage and the compressed air lines. The electronics are of a modular design and the individual modules are of a plug-in design. The connections for the signal inputs and outputs are on connectors (industrial standard) so that they can be controlled via an overriding system. Subject to technical modifications. Technical Data: Line supply: 230 V AC, 50 – 60 Hz Power configuration: 0.9 kVA Air consumption: approx. 100 l/min Compressed air connection: 4 – 6 bar Treatment width: max. 15mm Standard hose length: connection between generator and ext. transformer: 2.0m Generator dimensions: 450 x 480 x 180mm Weight: 21kg Arcospot® PGS 061 Plasma Device © Arcotec GmbH 2009 | Arcotec GmbH | Rotweg 24 | D-71297 Mönsheim | Tel.: +49(0)704492120 | Fax +49(0)7044921212 Modifications and mistakes reserved. Product Similar to illustration.