Arcotec GmbH Rotweg 24 | D-71297 Mönsheim Tel. +49 (0) 7044/9212-0 | Fax +49 (0) 7044/9212-12 www.arcotec.com | [email protected] Application: The Arcojet® PG 052 device is used for the pre-treatment of smaller plastic parts, especially plastic profiles in extrusion lines, injection moulded parts, beakers and tubes before they are glued and printed. A maximum treatment speed of approx. 15m/min. (per electrode head) can be achieved. The device can also be operated clocked or manually. The Arcojet PG 052 is equipped with two freely radiating electrodes which do not require any earthed counter-electrodes. The generator generates a high-voltage spark discharge from the electrodes which is transferred to the surface which is to be treated by means of an air current. The resulting plasma activates plastic surfaces so that printing ink, paints, adhesives, etc. can be anchored to it. Design: The device comprises the semi-conductor generator with integrated transformer for a generation of high-voltage and the electrode heads for the spark discharge. These are connected to the generator by a hose for the fan air and another for the high-voltage cable. Both of the heads can be triggered separately, enabling them to be used on two separate production lines. The electronics are of a modular design and the individual modules are of a plug-in design. The connections for the signal inputs and outputs are on connectors (industrial standard) so that they can be controlled via an overriding system. Technical Data: Line supply: 230 V, 50-60 Hz, 920 VA Treatment width: approx. 55mm per electrode Standard hose length: 1.8m, optional 3.0m Generator dimensions (W x D x H): 450 x 480 x 180mm Weight: 22kg Arcojet® PG 052 Plasma Device © Arcotec GmbH 2009 | Arcotec GmbH | Rotweg 24 | D-71297 Mönsheim | Tel.: +49(0)704492120 | Fax +49(0)7044921212 Modifications and mistakes reserved. Product Similar to illustration.