General information
General information
Arcotec GmbH specializes in surface treatment systems, offering a range of products including corona treaters, plasma treaters, flame treaters, and silicoating solutions. These systems are designed for various industries such as automotive, packaging, printing, glass, coating, glueing, extrusion, laminating, and medical/pharmaceutical sectors.
These systems utilize high-frequency corona discharge to increase the surface tension of films, sheets, and 3D parts, enhancing the adhesion of printing inks, paints, adhesives, and sealants.
The Arcojet and Arcospot models are highlighted. The Arcojet uses freely discharging electrodes with a gas jet to treat surfaces, while the Arcospot is designed for in-line treatment of 3D parts and profiles at speeds above 10m/min, improving adhesion and cleaning metal surfaces.
These treaters are suitable for films, foils, and 3D parts, offering high-speed treatment with minimal decay and no ozone production. They create polar groups on surfaces for improved adhesion. Silicoating can be combined with flame treatment to activate polymers and protect surface energy, particularly for humidity-resistant coatings.
This process involves using a gas flame supported by a silane precursor to produce an active silicate layer on surfaces, enhancing bonding, especially for humidity-resistant coatings.
Burners are available in lengths up to 12 meters and are specially designed for 3D parts and deburring applications.
Arcotec GmbH is located in Mönsheim, Germany, with contact details provided for both their German and USA offices.
Catalog excerpts
Arcotec GmbH Rotweg 24 | D-71297 Mönsheim Tel. +49 (0) 7044/9212-0 | Fax +49 (0) 7044/9212-12 www.arcotec.com | [email protected] Surface Treatment Systems Corona treaters Plasma treaters Flame treaters Silicoating for Automotive Packaging Printing Glass Coating Glueing Extrusion Laminating Medical / Pharmaceutical
Open the catalog to page 1
CORONA- / PLASMA TREATERS HF-CORONA WITH COUNTER ELECTRODE for films and sheets or freely radiating for 3D-parts. PRINCIPLE The surfaces are under corona discharge and their surface tension is raised for proper bonding of printing inks, paints, adhesives, sealants. ARCOJET ® Original-Arcojet, since 1977 PRINCIPLE Freely discharging electrodes. The generator produces a high voltage plasma that is carried out from the electrode onto the surfaces by a gas jet, mainly air. ARCOSPOT ® The unit is mainly used for the in-line-treatment of 3D-parts, profiles, grooves at a speed above 10m/min. PRINCIPLE...
Open the catalog to page 2
FLAME TREATERS FLAME TREATERS For film, foil and 3D-parts at high speed, high efficiency, little decay, no ozone, no rear side treatment. PRINCIPLE High speed treatment possible above 10m/min, back-up cooling required with polymer films. Similar to corona the flame produces polar groups at the surface for best adhesion of printing inks, paints, glues. BURNERS - length up to 12m - special design for 3D-parts - designed for deburring SILICOATING goes together with the flame for activating polymers and protecting the surface energy for a longer time. Mainly applied for metals, glass and polymers...
Open the catalog to page 3
Arcotec GmbH Rotweg 24 | D-71297 Mönsheim Tel. +49 (0) 7044/9212-0 | Fax +49 (0) 7044/9212-12 www.arcotec.com | [email protected] Corona/Plasma and Flame treaters to activate polymer surfaces for printing, painting, glueing, coating, foaming, raising wetability of film and 3D-parts and cleansing of metal surfaces as well. ARCOTEC GmbH ARCOTEC GmbH ARCOTREAT Corp 203 North LaSalle Street Suite 2100 Chicago, IL 60601 Tel 312-264-2740 Fax 312-264-2741 www.arcotreat.com [email protected] © Arcotec GmbH 2009 | Arcotec GmbH | Rotweg 24 | D-71297 Mönsheim | Tel.: +49(0)704492120 | Fax +49(0)7044921212...
Open the catalog to page 4
