Catalogs >
Arconic >
Marson Product Brochure

Marson Product Brochure
44Pages

Catalog excerpts

Industrial Distribution Group Rivets, rivet nuts and installation tools

Alcoa Fastening Systems-Industrial Distribution Group (AFS-IDG) offers the broadest line of blind fasteners for industrial applications in the industry. The breadth of the line is supported by a nationwide network of independent stocking warehouses, maintaining inventories that can deliver product to customers within hours if necessary. In short, the company’s responsiveness to its customers and the needs of industry is second to none. In an ongoing effort to be the best, AFS-IDG offers custom services such as painting, plating, anodizing, packaging, bar-coding and labeling. Add to this a...

Open the catalog to page 2

General Information — Blind Rivets Rivet Styles Materials Available Open End • For blind fastening where there is no Steel/steel, Aluminum/aluminum access to opposite side of work Aluminum/steel, Stainless/stainless • Simple to install Stainless/steel, Copper/brass, Copper/steel • Wide variety of head styles and lengths available from 3⁄32" to 1⁄4" diameters Closed End • Moisture-resistant due to closed end Aluminum/steel, Aluminum/aluminum, • Greater shear and tensile strength Stainless/stainless • Mandrel is retained 100% of time • 1⁄8" to 1⁄4" diameters • Extended grip range capacity •...

Open the catalog to page 3

Design Information AFS Code Descriptions Example: ABL6-6A Design Information 1. The shear and tensile strength of the rivet selected and the number of rivets used in the application should equal or exceed the joint strength requirements. Typical ultimate shear and tensile strengths are listed by diameter and material on pages 5 through 16 of this catalog. Testing is recommended before final selection and use in product. SHEAR TENSILE 2. The rivet body material should be compatible with the materials to be joined to resist galvanic corrosion which may result in reduction of joint strength....

Open the catalog to page 4

Steel Rivets Plated-Steel Rivet • Coated Steel Mandrel • IFI Grade 30 Grip Range Inch Drill No. & Hole Size E Head Height Max. Inch (mm) L Rivet Length Max. Inch Typical Ultimate Strength (lbs.) (newtons) Shear Tensile 160 711 305 1356 KLIK-FAST RIVETS conform to IFI-114 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities.

Open the catalog to page 5

Aluminum Rivets 5052 Aluminum Rivet • Aluminum Mandrel • IFI Grade 11 Buttonhead Grip Range Drill No. & Hole Size E Head Height Max. Inch (mm) L Rivet Length Max. Inch Typical Ultimate Strength (lbs.) (newtons) Shear Tensile 80 355 155 689 KLIK-FAST RIVETS conform to IFI-114 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities.

Open the catalog to page 6

Aluminum/Steel Rivets 5056 Aluminum Rivet • Coated Steel Mandrel • IFI Grade 19 Buttonhead Grip Range Drill No. & Hole Size E Head Height Max. Inch (mm) L Rivet Length Max. Inch Typical Ultimate Strength (lbs.) (newtons) Shear Tensile 120 534 225 1000 KLIK-FAST RIVETS conform to IFI-114 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities.

Open the catalog to page 7

Stainless Rivets Stainless Rivet • Stainless Mandrel • IFI Grade 51 Buttonhead Grip Range Drill No. & Hole Size E Head Height Max. Inch (mm) L Rivet Length Max. Inch Typical Ultimate Strength (lbs.) (newtons) Shear Tensile 520 2310 KLIK-FAST RIVETS conform to IFI-114 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities.

Open the catalog to page 8

Stainless/Steel Rivets Stainless Rivet • Coated Steel Mandrel • IFI Grade 50 Buttonhead Grip Range Drill No. & Hole Size E Head Height Max. Inch (mm) L Rivet Length Max. Inch Typical Ultimate Strength (lbs.) (newtons) Shear Tensile 520 2310 KLIK-FAST RIVETS conform to IFI-114 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities.

Open the catalog to page 9

Closed-End Rivets 5056 Aluminum/Steel • IFI Grade 19 Buttonhead Grip Range Drill No. & Hole Size E Head Height Max. Inch (mm) L Rivet Length Max. Inch Typical Ultimate Strength (lbs.) (newtons) Shear Tensile 240 1060 Note: A slightly smaller mandrel diameter is required for closed-end rivets; therefore when setting closed-end rivets using Marson brand rivet setting tools, we recommend you use one size smaller nosepiece when possible (i.e., to set 1/8” rivets, use 3/32” nosepiece). KLIK-FAST RIVETS conform to IFI-126 (inch). Millimeters (mm) and newtons (N) are in green. **Also available in...

Open the catalog to page 10

Multi-Grip Rivets Buttonhead Large Flange Plated Steel Rivet • Steel Mandrel Steel Buttonhead Grip Range Drill No. & Hole Size E Head Height Max. Inch (mm) .033 .850 .047 1.20 .069 1.75 L Rivet Length Max. Inch ‡ Countersunk–Total Length (L) including head Millimeters (mm) and newtons (N) are in green. **Also available in packaged quantities. *Klik-Fast multi-grip rivets conform to IFI-116. Multi-grip rivets provide an effective and economical alternative to other, more costly methods of fastening, because one size handles the grip range capacity of up to 3 standard open end rivets....

Open the catalog to page 11

Specialty Rivets #110 Copper/Brass & #110 Copper/Steel (copper-plated mandrel) AFS Description CB4-2B CB4-4B CB4-2C CB4-4C Grip Range Drill No. & Hole Size E Head Height Max. Inch Typical Ultimate Strength (lbs.) (newtons) B - Copper/Brass; C - Copper/Steel (copper-plated mandrel) **Also available in packaged quantities. Grip Range Drill No. & Hole Size Tensile newtons For black rivets add BL to the part number. White available as special order item. Refer to price list for bulk part number. Painted Rivets* AFS Description Rivet Color Grip Range Inch Drill No. & Hole Size (mm) **Also...

Open the catalog to page 12

Specialty Rivets Plated Steel Body Plated Steel Mandrel AFS Description Steel Q-Lok™ Rivets Grip Range Drill No. & Hole Size (mm) E Head Height Max. Inch (mm) Typical Ultimate Strength (lbs.) (newtons) Shear Tensile 1050 4670 T-Rivets/Klik-Split® Aluminum/Steel† — — — — — — † equires nosepiece No. M96028 when using the Marson brand Big Daddy® or Big Daddy II hand tool. R KLIK-FAST RIVETS conform to IFI-130 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. **Also available in packaged quantities. Automotive/Special Application Rivets Trim Rivets AFS Description Grip...

Open the catalog to page 13