TGE-121FLEXIBLY ADAPTABLE TESTED ACCORDING TO Our TGE-121 pushbutton device can be adapted to numerous specific requirements in just a few steps. The transmitter comes with 25 single-step pushbuttons. The signals from the pushbuttons on the front panel can be transmitted in accordance with Cat. 3 PLd. A freely programmable 2.8" colour graphic display is available on request and can be programmed via Qt. The programming can be carried out either by the customer or by ARCON. If required, a non-contact safety switch (PSEN) can be integrated in the bottom housing, with the wall mount serving as the counterpart. In conjunction with the optional cable control, the transmitter can be charged during operation. TECHNICAL DATA PROTECTION CLASS • 6 RGB LEDs for feedback or as status indicators • 2.8" colour graphic display, freely programmable via Qt • Brightness sensor • Toggle switch (momentary or latching) up to Cat. 2 PLd / SIL2 • Rotary switch (multi-step) • Non-contact safety switch (PSEN) • Vibration alarm • Cable control with integrated charging function • Layer switching • User-defined switch-off time • Customised labelling • Shoulder belt • Wall mount • FIDLOCK mount (+belt clip) • Integrated magnetic holder © Copyright ARCON GmbH 2025-04-01 I Modifications and errors reserved. ARCON GmbH WiesnerstraSe 20 4950 Altheim I Austria +43 / 7723 / 21501-0 [email protected] ARCON GmbH Branch Office Germany Adalbert-Stifter-StraSe 2 84085 Langquaid I Germany +49 / 9452 / 93375-0 [email protected] arcon Safety Radio Remote Controls Photos | Graphics | Image rights | Copyright: ARCON GmbH Photos: skyphoto.me, istockphoto.com, shutterstock.com Design: komma2 Kuchenbecker