Specifications:
The document details the EmCORE-i2501 series, featuring soldered onboard Intel® Atom™ Processors N2600 or D2550. It supports single-channel 18/24-bit LVDS and DVI-I ports, RS-485 auto-flow control, and operates within a temperature range of -20 to 70°C. The board includes a DDR3 SO-DIMM socket supporting up to 4GB of 1066MHz SDRAM, and an AMI BIOS.

System and I/O:
The system is powered by an Intel® PCH NM10 chipset and includes a Fintek F81866 Super IO chipset. It offers multiple I/O options, including RS-232 and RS-232/422/485 serial ports, six USB 2.0 ports, and a Mini-Card socket for expansion. Storage options include a Serial ATA port with a 300MB/s transfer rate and either a CFast socket or an 8GB NANDrive.

Networking and Audio:
Networking is supported by two Intel® 82583V PCIe GbE controllers. The audio interface is managed by a Realtek® ALC662 5.1 Channel HD Audio CODEC, supporting mic-in, line-in, and line-out.

Display and Graphics:
The integrated graphics chipset is Intel® GMA 3650 for the D2550 processor and GMA 3600 for the N2600 processor. The graphic interface supports DVI-I with resolutions up to 1920x1200 and single-channel LVDS.

Mechanical and Environmental:
The board requires a DC 12V power input, with typical power consumption of 1.26A for the N2600 and 1.42A for the D2550. It operates in humidity levels of 10 to 95% at 70ºC and measures 146 x 102 mm.

Ordering Information:
The document lists various models of the EmCORE-i2501 series, including options with soldered 8GB NANDrive for OEM requests. Optional accessories include a cable kit with serial, audio, USB, and SATA cables.

Additional Information:
The document includes a block diagram illustrating the system architecture and connectivity options. All specifications are subject to change without notice, and the last update was on 5/2/2015.