Model 1083B GPS Satellite-Controlled Frequency Standard/Comparator
4Pages

{{requestButtons}}

Catalog excerpts

Model 1083B GPS Satellite-Controlled Frequency Standard/Comparator - 1

TIMING AND FREQUENCY PRODUCTS GPS Satellite-Controlled Frequency Standard/Comparator With the addition of a vacuum fluorescent display (VFD) and keyboard, the Model 1083B is ideal for both attended and unattended operation. All functions of the Model 1083B are available via the front panel and the serial interface. In addition to status and control information, the Model 1083B provides both UTC and local time, antenna position, and frequency deviation. Eight LEDs monitor operating status. The Model 1083B is equipped with an 85 to 264 Vac/110 to 370 Vdc power supply with an IEC-320 detachable cordset. Additional 1 MHz, 5 MHz, and 10 MHz signals are available (up to eight total outputs) eliminating the need for a separate distribution amplifier. For additional 1 PPS outputs, use the Arbiter Systems® Model 1073A Distribution Amplifier. The Model 1073A provides a total of up to 12 additional outputs. The GPS Data Backup Battery is included in the Model 1083B. This feature improves acquisition time by supplying constant power to the real-time clock and RAM in the GPS receiver module. Arbiter Systems, Inc. · 1324 Vendels Circle, Suite 121 · Paso Robles, CA 93446 · USA Tel: +1.805.237.3831 · Fax: +1.805.238.5717 · E-mail: sales@arbiter.com · Internet: http://www.arbiter.com The Arbiter Systems®, Inc. Model 1083B GPS SatelliteControlled Frequency Standard/Comparator delivers performance comparable to atomic frequency standards, but at a fraction of the price. The outstanding long-term accuracy of the GPS system and the excellent short-term stability of Wenzel Streamline 10 MHz, third overtone SC-cut ovenized quartz oscillator combine to produce traceable, standard frequency outputs of 1 MHz, 5 MHz, and 10 MHz with outstanding spectral purity and long-term stability. These outputs are suitable for use as the frequency reference for counters and signal generators, or for multiplication to microwave frequencies. An output of one pulse per second (1 PPS) is also provided for time standard applications. The Model 1083B can also be equipped with a frequency measurement option (1083Bopt09) that allows the 1083B to measure the deviation and Allan Variance of a 1 MHz, 5 MHz, or 10 MHz signal and the deviation of a 1

Open the catalog to page 1
Model 1083B GPS Satellite-Controlled Frequency Standard/Comparator - 2

TIMING AND FREQUENCY PRODUCTS Oscillator Type Stability Warm-up Wenzel Streamline 10 MHz, thirdovertone SC-cut ovenized 1 day: 1.0x10-9 Over Temperature: 1.5x10-8 6 hours Position Accuracy 10 meters, rms, 90% confidence Satellite Tracking Twelve (12) channel, GPS-L1, C/A code (1575.42 MHz). Receiver simultaneously tracks up to twelve satellites. Results from all tracked satellites are averaged in Position-Hold Mode or, with PositionHold Mode off, using least-squares estimation. Acquisition 150 seconds typical, cold start 15 minutes, 90% confidence, cold start 40 seconds, typical, with...

Open the catalog to page 2
Model 1083B GPS Satellite-Controlled Frequency Standard/Comparator - 3

TIMING AND FREQUENCY PRODUCTS Included Description GPS Antenna, pipe mountable 15 m (50 ft) RG-6 Antenna Cable 19 in. Rack Mount Kit Operation Manual Power Cord 1200 to 19,200 baud; 7 or 8 data bits; 1 or 2 stop bits; even/odd/no parity Interrogate mode Broadcast modes include standard ASCII (IRIG-J), Extended ASCII, ASCII with Time Quality, ASCII with Time Quality and Year, and Vorne large-display, Measurement Deviation Male 9-pin D-subminiature Available Description Power Cord 15 m (50 ft) RG-6 Antenna Cable 30 m (100 ft) RG-6 Antenna Cable 45 m (150 ft) RG-6 Antenna Cable 60 m (200 ft)...

Open the catalog to page 3
Model 1083B GPS Satellite-Controlled Frequency Standard/Comparator - 4

TIMING AND FREQUENCY PRODUCTS Model 1083B Specifications `YIXVSWVQUT PISRQPPIHHe Available Description RG-6 Type F Crimp Tool RG-6 Type F Male Crimp-on Connector 300 m (1000 ft) Roll RG-11 Cable RG-11 Stripping Tool RG-11 Type F Crimp Tool RG-11 Type F Male Crimp-on Connector 19 in. Rack Slide Kit 24 in. Rack Mount Kit PIchWf dXcb YVa WIPYRQU The following are the available IEC-320 mating cordset plug style and specifications: Option Voltage No. Country Specification Rating P01 Continental Europe CEE 7/7 220V P02 Australia/NZ/ AS 3112PRC 1981 240V P03 U.K. BS 1363 240V P04 Denmark Afsnit...

Open the catalog to page 4

All Arbiter Systems catalogs and technical brochures

  1. 936A

    1 Pages

  2. 933A

    5 Pages

  3. 1133A

    6 Pages