Catalog excerpts
TESTA_e MINI BENCHTOP ENVIRONMENTAL AND TEMPERATURE TEST CHAMBERS
Open the catalog to page 1TESTA_e MINI ARALAB is a company specialised in designing, developing, manufacturing and servicing of high quality climatic chambers and controlled environment rooms. Since 1985 we have been perfecting ways to create and control temperature, humidity, light, air flow and many other environmental conditions. Only the highest quality components are used to manufacture our chambers so customers can have the best equipment for their research and testing purposes. Control the environment, Your own climate. Testa_e temperature and humidity testing chambers offer precise and reproducible...
Open the catalog to page 2TESTA_e MINI TEMPERATURE AND HUMIDITY CONTROL RANGES MINI SERIES HIGH-LOW (HUMIDITY) CHAMBER TESTA_E MINI CT 30 EP30 TEMPERATURE RANGE TEMPERATURE FLUCTUATION TEMPERATURE DEVIATION HUMIDITY RANGE HUMIDITY DEVIATION TEMPERATURE HEAT-UP RATE TEMPERATURE PULL-DOWN RATE TESTA_E MINI TT 30 E65 TEMPERATURE RANGE TEMPERATURE FLUCTUATION TEMPERATURE DEVIATION HUMIDITY RANGE HUMIDITY DEVIATION TEMPERATURE HEAT-UP RATE TEMPERATURE PULL-DOWN RATE TEMPERATURE AND HUMIDITY CHART OF TESTA_E MINI CT 30 EP
Open the catalog to page 3TESTA_e MINI DIMENSIONS AND DRAWINGS TESTA_E MINI CT 30 EP30 / TESTA_E MINI TT 30 E65 EXTERNAL DIMENSIONS (HxWxD) (mm) INTERNAL DIMENSIONS (HxWxD) (mm) Power supply wire Cable port Drain pipe Switch On/Off Exhaust hole Exhaust hole Cable hole INSTALLATION REQUIREMENTS • AC220V/50Hz single-phase + protective grounding wire • AC(220±22)V POWER SUPPLY • (50±0.5)Hz • The earth resistance of protective grounding wire is less than 4Ω; • Users are required to provide air or power switches with appropriate capacity for equipment at the installation POWER SUPPLY CAPACITY MAXIMUM CURRENT WATER FOR...
Open the catalog to page 4TESTA_e MINI EQUIPMENT DESCRIPTION CONSTRUCTION • Outer wall: two-sided galvanized steel sheet with plastic-sprayed surface INSULATION ENCLOSING STRUCTURE • Inner wall: SUS304 para AISI 304 • Thermal insulating material for chamber body: polyurethane foam + glass wool • Thermal insulating material for door: glass wool • Axial fan • Evaporator (dehumidifier), humidifier • Overheat protector • Water supply and drainage port dry boil protector • Heater • Dry-bulb temperature transducer • Wet-bulb temperature transducer, wet-bulb sink • Single hinged door with the hinge at the left side and...
Open the catalog to page 5TESTA_e MINI REFRIGERATION SYSTEM WORKING MODE • Mechanical single refrigeration system (Air cooled) REFRIGERATION COMPRESSOR • Hermetically sealed low-noise piston compressor • Finned plate heat exchanger • Finned plate heat exchanger (Dehumidifer) THROTTLING DEVICE • Capillary & Electronic expansion valve (stepping motor driver) REFRIGERATING MACHINE CONTROL METHOD • The control system will automatically adjust the working condition of refrigeration machine in accordance with test conditions. • refrigeration system Compressor return air cooling circuit • Evaporative pressure adjustable...
Open the catalog to page 6TESTA_e MINI CONTROLLER DISPLAY 7 inches, 800X480 dot matrix, TFT 64k color LCD display OPERATING MODE Program mode: fixed value mode SETTING MODE English menu; input via touch screen PROGRAM CAPACITY Editable programs Quantity: 20 max Steps: 1000 max Cycles: each step has a maximum of 20 cycles (each cycle step has a maximum of 99 cycles); Fixed: 10 programs that can be linked Temperature: adjust according to the temperature range of the equipment (Upper limit: +5ºC; Lower limit: -5ºC) Humidity: (0~100) %RH Temperature: 0.1ºC Time: 0.1min Humidity: (0~100) %RH Thermocouple Platinum...
Open the catalog to page 7TESTA_e MINI FITOLOG SOFTWARE The FitoLog software pack is a set of applications designed to facilitate the monitoring and programming and data from the FitoClima chambers. It consists of 3 applications: FitoLog, FitoLogView and FitoProgram. FITOLOG Records and displays in real time all data and details related to the set-points, running variables and equipment behaviour. FITOPROGRAM This application simplifies the creation of programs and its integration on the chamber ClimaPlus controller. Up to 20 programs, each with 50 segments, can be designed and linked to create detailed...
Open the catalog to page 8Let’s meet! aralab@aralab.pt www.aralab.pt T: +351 219 154 960 Control the environment Your own climate
Open the catalog to page 9All Aralab catalogs and technical brochures
-
Temperature Shock test chamber
10 Pages
-
Curing chambers - 600/1200 PHCI
10 Pages
-
FitoTerm 150 CT2-80
10 Pages
-
FITOCLIMA WALK-IN BIO
13 Pages
-
FITOCLIMA 600 & 1200 STABILITY
11 Pages
-
Stability rooms
12 Pages
-
FITOCLIMA 600 & 1200 STABILITY
11 Pages
-
FITOCLIMA 600 & 1200 BIO
11 Pages
-
FitoClima HP 'walk-in'
11 Pages
-
FITOCLIMA WALK-IN PL/PLH
13 Pages
-
MULTI-TIER PLANT GROWTH ROOMS
13 Pages
-
SINGLE-TIER PLANT GROWTH ROOMS
11 Pages
-
FitoClima 600 PDH
8 Pages