video corpo

FitoTerm 150 CT2-80
10Pages

{{requestButtons}}

Catalog excerpts

FitoTerm 150 CT2-80 - 1

TESTING FITOTERM 150 CT2 ARALAB TEMPERATURE SHOCK TESTING CHAMBER WITH TWO INDEPENDENT HOT/COLD CHAMBERS AND ELECTROMECHANICAL LIFT

Open the catalog to page 1
FitoTerm 150 CT2-80 - 2

ARALAB is a company specialized in designing, developing, manufacturing and servicing of high quality climatic chambers and controlled environment rooms. Since 1985 we have been perfecting ways to create and control temperature, humidity, light, air flow and many other environmental conditions. Only the highest quality components are used to manufacture our chambers so customers can have the best equipment for their research and testing purposes. Control the environment, your own climate. KEY FEATURES • Simple and reliable functioning • Two independent (Hot / Cold) testing areas connected...

Open the catalog to page 2
FitoTerm 150 CT2-80 - 3

EQUIPMENT DESCRIPTION The temperature shock test chamber FitoTerm 150CTE2, features two independent chambers on the same chassis, with the upper (Hot) chamber heated by electric heaters and air circulation - reaching uniform temperatures of 200ºC; and the lower (Cold) chamber - with dynamic ventilation +/- 2m/s for homogenization and temperature uniformity - reaching cold temperatures down to -75°C. The temperature shock test is carried out by transferring the test specimens between the two chambers through an electro-mechanical lift, with +/- 5 seconds of transfer time. Aralab’s evolution...

Open the catalog to page 3
FitoTerm 150 CT2-80 - 4

DIMENSIONS AND DRAWINGS FITOTERM / FITOCLIMA 8.000 EXTERNAL DIMENSIONS (HxWxD) (mm) INTERNAL DIMENSIONS (HxWxD) (mm) Services hub installation needs: Electrical cabinet installation needs: 50mm water drain at floor level Supply power: 400VAC, 50Hz, 32A / 3-Phase + Neutral + Ground Electrical protection: Circuit breaker 3 x 32A + N with 300mA differential 3-Phase electrical cable RV-K 5G6 on the top RJ45 Ethernet socket communication port 3. Water cooled Water flow: up to 2000 litres/hour (at 25 ºC) Intake pressure: 2 to 5 bar Water entry and exit pipe: 1” or 28mm Differential pressure...

Open the catalog to page 4
FitoTerm 150 CT2-80 - 5

EQUIPMENT DESCRIPTION TEMPERATURE TEMPERATURE CONTROL Temperature control is made by the PLC Touch Screen ClimaPlus V controller, developed by Aralab and exclusively for its environmental test chambers. TEMPERATURE SENSORS • PT 100 DIN Class A, located in the air treatment tunnels. One in each chamber • PT 100 DIN Class A, mobile sensor HEATING • Heating is achieved by tubular stainless steel electric heaters located in the air treatment tunnel. Temperature is attained by a dynamic ventilator at ±2 m/s with programmed interruptions during the upwards and downward movements of the lift....

Open the catalog to page 5
FitoTerm 150 CT2-80 - 6

• Level 1 – High / Low individual thermostats with audible alarm • Level 2 – Intermittent audible alarm for deviation of selected the band limits CUT-OFF PANEL, SECURITY AND COMMUNICATIONS Mounted on left lateral panel of chamber and equipped with: Security thermostat Mains switch Audible alarms RS232 connection COMMAND PANEL • At the front door with Touch Screen Programmable Controller Climaplus V with 120 mm x 90 mm 1 stainless steel shelf 1 entry port at the top of the chamber 6 casters with adjustable height Observation window in multi-layer anti-condensation glass Instructions manual...

Open the catalog to page 6
FitoTerm 150 CT2-80 - 7

CONTROLLER CLIMA PLUS V Programmable PLC ClimaPlus V, exclusively developed for Aralab chambers Programmable, easy to use controller with Touch Screen Display (168 x 112mm) Resolution of 0.1ºC for Temperature and 0.1% for Relative Humidity Capability for configuring 50 test programs of 50 segments each Non-volatile memory Automatic restart of test due to electric power failure, without losing data and where it was interrupted Configuration, monitoring and recording of all alarms Possibility of performing events by external commands RS232 output for connecting computers Graphical...

Open the catalog to page 7
FitoTerm 150 CT2-80 - 8

FITOLOG SOFTWARE The FitoLog software is a set of applications designed to monitor and register data from the chambers processes variables. The software consists of 3 applications: FitoLog, FitoLogView and FitoProgram. FITOLOG Displays and records in real time all the data and details of the measurements and respective set-points in a file. It also retrieves the data of process variables, errors, alarms and allows external alerts configuration, which may include Email or SMS to report the condition of the equipment or warnings of alarms. FITOLOGVIEW It is a working tool to process the data...

Open the catalog to page 8
FitoTerm 150 CT2-80 - 9

INSTALLATION REQUIREMENTS To ensure a correct functioning of the chamber, the following installation conditions are required: INSTALLATION SITE The place should be easily accessible, according to equipment dimensions and weight. It should have good air circulation and a room temperature between 10º and 26ºC. The floor should be leveled and a minimum distance of 50cm from the walls of other equipment must be kept. ELECTRICAL SUPPLY 3PH, N/PE, 400V, 32Amp WATER CIRCUIT FOR COOLING CONDENSER A cold water circuit is required for the cold system condenser. Technical characteristics: • Water...

Open the catalog to page 9
FitoTerm 150 CT2-80 - 10

Let’s meet! aralab@aralab.pt www.aralab.pt T: +351 219 154 960 Control the environment Your own climate

Open the catalog to page 10

All Aralab catalogs and technical brochures