Cigar rolling machine - Case study

Product catalog summary

Overview: The document provides technical specifications and procedures for using a cigar rolling machine, specifically focusing on the cleaning process using dry ice blasting.

Equipment Specifications:

Blaster Model: BL60
Air Volume Requirement: Less than 4-6 m³/min
Pressure Requirement: 5-6 bar
Micro Pellets Size: Ø1.7 mm
Nozzle Types: Round nozzle for inside the machine, wide angle nozzle for surfaces

Procedures and Recommendations:

Ensure careful handling around sensors and plastic clips to avoid damage.
Avoid blasting directly into bearings to prevent mechanical issues.

Feasibility Study and Advantages of Dry Ice Cleaning:

The process is dry, reducing the risk of moisture-related issues.
Short downtime is achieved, with cleaning time reduced from 1 hour to 15 minutes per machine.
Dry ice can be produced on-site using Aquila Triventek PE80 + RE80 equipment, a generator, and a mobile CO2 tank.

Catalog excerpts

Cigar rolling machine Before Blaster: BL60 Air volume: Less than 4-6 m3/min Low pressure: 5-6 bar Micro Pellets (Ø1,7 mm) Round nozzle inside machine Wide angle nozzle on surfaces Feasibility study: Dry Ice was preferred because: • The process is dry • Short down time • Dry ice could be produced on-site using Aquila Triventek PE80 + RE80 equipment, generator and a mobile CO2 tank • Use to be manually cleaned. 1 machine per hour. With Dry Ice cleaning is 15 min. Pay attention to sensors and plastic clips Do not blast directly into bearings Aquila Triventek A/S · Industrivej 9 · DK-5580 Nørre Aaby · Tel. +45 70 22 12 92 · [email protected] · www.aquila-triventek.com

Open the catalog to page 1

All Aquila Triventek A/S catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list